From: Mark Snow (msnow@ipexpert.com)
Date: Sat Dec 29 2007 - 17:13:21 ART
Hi Peter,
The Berbee Remote Control software relies on you having a CTI user
setup and Device Association setup to the phone(s) in question to be
controlled.
So you can use it if you own it (not freeware) and set it up on your
own laptop.
Also we a few nice video's on the site on how to setup multiple
Microsoft Loopback Adapters and change their MAC Addresses - so that
you have multiple MAC addy's with which to connect to your CallManger,
CME, and/or PSTN phone if you choose.
https://proctorlabs.com/downloads/media/PSTN-IPBlue-Demo.mp4
Of course, if you like, you can use your own Router and 4 Cisco
hardware IP Phones through our EasyVPN option (full instructions when
you log in to your Proctorlabs.com account) - and then you wouldn't
need this IP Blue option - which do shut off every 20 mins unless you
buy a license from them which we recommend.
Cheers,
Mark Snow
CCIE #14073 (Voice, Security)
CCSI #31583
Senior Technical Instructor - IPexpert, Inc.
A Cisco Learning Partner - We Accept Learning Credits!
Telephone: +1.810.326.1444
Fax: +1.309.413.4097
Mailto: msnow@ipexpert.com
IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On
Demand and Audio Certification Training Tools for the Cisco CCIE R&S
Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and
CCIE Storage Lab Certifications.
On Dec 29, 2007, at 10:06 AM, Tarun Pahuja wrote:
> Thanks brian, I did not have a loopback interface, now it is working.
> One more question is do you know about berbee remote control
> software, Can
> we get a demo for it? how much does it cost? any recommendations?
>
> Cheers,
> Peter
>
> On Dec 29, 2007 11:46 AM, Brian Dennis
> <bdennis@internetworkexpert.com>
> wrote:
>
>> Are you running it with the "/d" option ("C:\Program Files\IP
>> blue\VTGO\VTGO-PC.exe" /d) and have you created the additional
>> loopback
>> interfaces (assuming you only have one real NIC)? Also be sure to
>> change
>> the MAC addresses of the loopbacks as they tend to share a single MAC
>> address.
>>
>> Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
>> bdennis@internetworkexpert.com
>>
>> Internetwork Expert, Inc.
>> http://www.InternetworkExpert.com <http://
>> www.internetworkexpert.com/>
>> Toll Free: 877-224-8987
>> Direct: 775-745-6404 (Outside the US and Canada)
>>
>>
>>> ----- Original Message -----
>> Subject: IPExpert Voice Rack
>> Date: Sat, December 29, 2007 8:12
>> From: "ccie preparation" <ccie22@gmail.com>
>>
>>> I am using ipexpert voice lab and unable to use ipblue phone to
>>> run in
>>> multiple instances, what am i doing wrong? can i run multiple
>>> instances
>> of
>>> ipblue on my laptop and register with different phone numbers?
>>>
>>> Can I use berbee software also to remote control the remote phones?
>>>
>>> Thanks,
>>> Peter
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:32 ARST