From: sirus MOGHADASIAN (cyrus.mgh@gmail.com)
Date: Fri Dec 28 2007 - 10:11:36 ART
Hi shiran ,
I don't think it happens because of time matter , I mean it should converge
,I reset every thing ,try it its very wierd , I cannot figure out what
happens there ,I know it's 7164672 / 1794560 = 3.99 but IEWB lab 8
specifies that your ratio must be 4:1 , exactly.
o if you found out how it works please inform me.
Cyrus
On Dec 23, 2007 11:31 PM, shiran guez <shiranp3@gmail.com> wrote:
> Hi Cyrus
>
> If you take 7164672 / 1794560 = 3.99 so it is 4:1 ratio
>
> probably what happened is you changed the delay on one of the path
> interfaces and it took longer then you hoped for to take affect, as you can
> see on the first you delay for the eth is 100100 microsec and on the second
> time the delay is 60100.
>
>
>
>
> On Dec 23, 2007 9:34 PM, sirus MOGHADASIAN <cyrus.mgh@gmail.com> wrote:
>
> > Hi GS,
> >
> > It seems traffic share count shows unpredictable manner.
> >
> > Rack1R4#sh ip ro 222.22.2.0
> > Routing entry for 222.22.2.0/24
> > Known via "eigrp 1024", distance 170, metric 2818560, type external
> > Redistributing via eigrp 1024
> > Last update from 174.1.145.1 on Serial1/0, 00:00:45 ago
> > Routing Descriptor Blocks:
> > 174.1.145.1, from 174.1.145.1, 00:00:45 ago, via Serial1/0
> > Route metric is 7164672, *traffic share count is 47*
> > Total delay is 215110 microseconds, minimum bandwidth is 1544 Kbit
> > Reliability 255/255, minimum MTU 1500 bytes
> > Loading 1/255, Hops 2
> > * 174.1.45.5, from 174.1.45.5, 00:00:45 ago, via Ethernet0/1
> > Route metric is 2818560, *traffic share count is 120*
> > Total delay is 100100 microseconds, minimum bandwidth is 10000 Kbit
> > Reliability 255/255, minimum MTU 1500 bytes
> > Loading 1/255, Hops 1
> >
> > Rack1R4(config)#do sh ip cef 222.22.2.0 inter
> > 222.22.2.0/24, version 484, epoch 0, per-destination sharing
> > 0 packets, 0 bytes
> > via 174.1.145.1 , Serial1/0, 0 dependencies
> > traffic share 47
> > next hop 174.1.145.1, Serial1/0
> > valid adjacency
> > via 174.1.45.5 , Ethernet0/1, 0 dependencies
> > traffic share 120
> > next hop 174.1.45.5, Ethernet0/1
> > valid adjacency
> > ------------------------------------------------------------------------------------
> >
> > Let's consider another situation (just watch metric
> >
> > changes)------------------------------------------------------------------------
> > Rack1R4#sh ip ei to 222.22.2.0 255.255.255.0
> > IP-EIGRP (AS 1024): Topology entry for 222.22.2.0/24
> > State is Passive, Query origin flag is 1, 1 Successor(s), FD is 1660928
> >
> > Routing Descriptor Blocks:
> > 174.1.45.5 (Ethernet0/1), from 174.1.45.5, Send flag is 0x0
> > Composite metric is (1794560/258560), Route is External
> > Vector metric:
> > Minimum bandwidth is 10000 Kbit
> > Total delay is 60100 microseconds
> > Reliability is 255/255
> > Load is 1/255
> > Minimum MTU is 1500
> > Hop count is 1
> >
> > 174.1.145.1 (Serial1/0), from 174.1.145.1, Send flag is 0x0
> > Composite metric is (7164672/1660672), Route is External
> > Vector metric:
> > Minimum bandwidth is 1544 Kbit
> > Total delay is 215110 microseconds
> > Reliability is 255/255
> > Load is 1/255
> > Minimum MTU is 1500
> > Hop count is 2
> >
> > Rack1R4#sh ip cef 222.22.2.0 int
> > 222.22.2.0/24, version 431, epoch 0, per-destination sharing
> > 0 packets, 0 bytes
> > via 174.1.145.1, Serial1/0, 0 dependencies
> > * traffic share 1*
> > next hop 174.1.145.1, Serial1/0
> > valid adjacency
> > via 174.1.45.5, Ethernet0/1, 0 dependencies
> > *traffic share 4*
> > next hop 174.1.45.5, Ethernet0/1
> > valid adjacency
> >
> >
> >
> > it seems traffic share count is not changes in metrics ratio, in first
> > case
> > is 120/47 and in second case is 4/1 .
> >
> > How can I adjust traffic share count value precisely?
> >
> >
> >
> > Thanks
> > Cyrus
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
> --
> Shiran Guez
> MCSE CCNP NCE1
> http://cciep3.blogspot.com
> http://www.linkedin.com/in/cciep3
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:32 ARST