From: Paul Cosgrove (paul.cosgrove@heanet.ie)
Date: Fri Dec 28 2007 - 08:49:55 ART
BSR is part of the PIMv2 protocol, while AutoRP is compatible with v2
but was created separately by cisco and is not part of the v2 protocol.
The question asks you to satisfy the criteria using PIMv2, without
saying that you an use anything else, so AutoRP is thereby ruled out.
The requirement that R3 must announce RP to group mappings, rather than
cRP to group mappings, does indeed introduce a little confusion and
would be worth clarifying with the proctor in the real lab. I suppose
the wording still allows R3 to advertise more than one RP per group, so
it does not rule out BSR.
Provided the interface is accessible from all other routers, it
shouldn't matter which you use.
Paul.
daniel wrote:
> Hi,While doing IEWB sinario for SP , in the multicast sinario I came across a question." Configure PIM Ver2 so that R3 dissiminates RP to group mappings and accepts all PIM register messages through out the multicast network." I'm quite confused whether to use BSR or Auto RP. The solution uses BSR. But for me the question in no way instructs me to use BSR.Also the question doesn't talk abt candidate RP. If the question doesn't mention which interface is to be used a s candidate RP which one am I supposed to choose?Please help me.Thanks,Dany
>
>
> Regards,
> Dany
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:32 ARST