From: Chan Hong (chan_hong33@yahoo.com)
Date: Mon Dec 24 2007 - 16:03:40 ART
What is the problem you met? Moreover, can you post the tunnel interface
config? Because I don't see "ip nat outside" in R4 and don't know what is the
ip address tunnel45 using.
Regards,
Howard
----- 6l%s-l%s ----
1H%s$H!R
"iosluver@gmail.com" <iosluver@gmail.com>
&,%s$H ccielab@groupstudy.com
6G0e$i4A!R 2007 &~ 12$k 25 $i ,P4A$G $W$H 2:21:02
%DCD!G NAT with 2 WAN links
(Active & Backup)
HiGS,
Can someone please shed some light on the following
scenario & how it can be achieved with only the given topology. There 2
routers with a Frame-relay & PPP link between them. I want the PPP link to
serve as a backup when the frame-relay link fails. I want R4 to perform NAT on
its E1/0 so all packets destined to R5 are translated from the 10.10.4.0/24
subnet to an address R5 has a route for. I tried using a tunnel interface but
it doesn't work. Are there restrictions with using NAT on logical interfaces
(Loopback or tunnel)?
Frame-Relay
-----------
- -
R4---------- -
-------------R5
- -
-----------
PPP
R4
**********
interface Loopback0
ip address 150.1.4.4 255.255.255.0
end
interface Ethernet1/0
ip address
10.10.4.4 255.255.255.0
ip nat inside
ip virtual-reassembly
no ip route-cache
cef
no ip mroute-cache
full-duplex
end
!
int s1/0
ip address 156.1.45.4
255.255.255.0
encapsulation frame-relay
no ip route-cache cef
ip ospf
hello-interval 3
no ip mroute-cache
frame-relay map ip 156.1.45.5 405
broadcast
no frame-relay inverse-arp
interface Serial1/1
ip address 156.1.0.4
255.255.255.0
encapsulation ppp
no ip route-cache cef
ip ospf cost 1000
no ip
mroute-cache
clock rate 128000
router ospf 1
router-id 150.1.4.4
log-adjacency-changes
network 150.1.4.4 0.0.0.0 area 0
network 156.1.0.0
0.0.255.255 area 0
neighbor 156.1.45.5
!
ip nat inside source route-map TEST
interface Tunnel45 overload
R5
*******
interface Loopback0
ip address
150.1.5.5 255.255.255.0
end
interface Serial1/0
ip address 156.1.45.5
255.255.255.0
encapsulation frame-relay
no ip route-cache cef
ip ospf
hello-interval 3
ip ospf priority 0
no ip mroute-cache
frame-relay map ip
156.1.45.4 504 broadcast
no frame-relay inverse-arp
end
interface Serial1/1
ip address 156.1.0.5 255.255.255.0
encapsulation ppp
no ip route-cache cef
ip
ospf cost 1000
no ip mroute-cache
end
router ospf 1
router-id 150.1.5.5
log-adjacency-changes
network 150.1.5.5 0.0.0.0 area 0
network 156.1.0.0
0.0.255.255 area 0
!
Thanks in advance.
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:32 ARST