From: Farrukh Haroon (farrukhharoon@gmail.com)
Date: Fri Dec 21 2007 - 08:15:54 ART
Thank you for this interesting information, specially if the CSM (or
AIP-SSM) shows up in the Security Lab...this would help those who want to
setup a home lab.
However the CSM will gradually fade away IMHO, it doesn't really perform as
well as it should.
Or it might be migrated to some IronPort code (utilizing the same hardware).
Regards
Farrukh
On Dec 21, 2007 12:07 PM, Matthew Long <mlong@comms-care.com> wrote:
> I have done a little playing with the ASA-SSM-10 and you can load either
> the CSC or AIP images on the same card.
>
> I replaced the supplied flash (256MB) with a new one 512MB and was able
> to load and run both images.
>
> Which suggests you could reuse a module in a different role, not sure
> how Cisco would deal with the licensing on this especially as a CSC-10
> is $1500 cheaper than a AIP module!
>
> Matt
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Matthew Long
> Sent: 20 December 2007 15:56
> To: ccielab@groupstudy.com
> Subject: OT: ASA-SSM-10
>
> Just a thought, I have been playing with ASA SSM modules today and I was
> wondering if anyone had investigated if it is possible to convert a
> ASA-SSM-10 to be either a CSC or AIP module just by loading different
> images on them?
>
>
>
> The cards seem identical I was just wondering if it was only the flash
> image that was different.
>
>
>
>
>
> Thanks
>
>
>
> Matt Long
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:31 ARST