probem in Cat2960G

From: Muhammad Saleem (msaleems@gmail.com)
Date: Thu Dec 20 2007 - 17:15:54 ART

• Next message: Joseph Brunner: "RE: Now what?"
• Previous message: Narbik Kocharians: "Re: Final 40 Approach??"
• Next in thread: keith tokash: "RE: probem in Cat2960G"
• Maybe reply: keith tokash: "RE: probem in Cat2960G"
• Maybe reply: Hulbert, Jerald: "RE: probem in Cat2960G"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I have a CISCO Cat2960G; it was working fine, due to power shutdown, one of
the CISCO fiber SFP ports went down, since then I was not able to bring it
up, now when I replace this SFP with the new one I got the following error
message

1w3d: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/4, changed state to up
1w3d: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/4, changed state to down
1w3d: %PHY-4-MODULE_DUP: SFPs in Gi1/0/4 and in Gi1/0/8 have duplicate
vendor-id
 and serial numbers
1w3d: %PM-4-ERR_DISABLE: gbic-invalid error detected on Gi1/0/4, putting
Gi1/0/4
 in err-disable state
1w3d: %PM-4-ERR_DISABLE: gbic-invalid error detected on Gi1/0/8, putting
Gi1/0/8
 in err-disable state
1w3d: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/8,
chan
ged state to down
1w3d: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/8, changed state to down

• Next message: Joseph Brunner: "RE: Now what?"
• Previous message: Narbik Kocharians: "Re: Final 40 Approach??"
• Next in thread: keith tokash: "RE: probem in Cat2960G"
• Maybe reply: keith tokash: "RE: probem in Cat2960G"
• Maybe reply: Hulbert, Jerald: "RE: probem in Cat2960G"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:31 ARST