From: Clay K Auch (clauch) (clauch@cisco.com)
Date: Fri Dec 14 2007 - 02:09:30 ART
Use the proctors ... Clarification is one main reason they are there. Just remember ... You need to ask questions in a way that demonstrates you know what you are talking about. Fishing for answers will simply get you a, "Go back and read the question again". Tuning your methods to include the proctors as part of your problem solving process will also save you time. You would be surprise how much time goes by as you sit there pondering the different options related to any one task. Don't troubleshoot anything for more than 10 minutes and really try not to spend more than 5 minutes on any one task at any one point in time ... Come back to it (I am instructing myself as I say this as well) :)
Clay
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Darby Weaver
Sent: Thursday, December 13, 2007 11:37 PM
To: devecchio; Ismail Masood
Cc: ccielab@groupstudy.com
Subject: Re: trunks
If the trunks don't say specifically, you might look at the etherchannel configuration and it might help you make a better choice, but then again, maybe not.
You could always ask for clarification.
--- devecchio <dt30083@gmail.com> wrote:
> Just make sure to read the question carefully, they will usualy say
> use an industry standard protocol or something similar. If they just
> dont specify then u r free to choose ur poision, just make sure u dont
> trap urself later..
>
> On Dec 13, 2007 8:54 PM, Ismail Masood <i.masoodk@gmail.com> wrote:
>
> > Hi All,
> >
> >
> > I am bit confused, if we asked to make trunks
> between the switches and no
> > details are provided then what should be the
> protocols and method used in
> > the cisco point of view.
> >
> >
> > Ishaq
> >
> >
>
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:30 ARST