From: AKHILESH THAKUR (akhi_thakur@hotmail.com)
Date: Wed Dec 12 2007 - 05:37:48 ART
Joe,
secondary address could be tried.
Akhi> Date: Tue, 11 Dec 2007 21:47:25 -0500> To: ccielab@groupstudy.com> From:
jsmith1234550@gmail.com> Subject: RIP Issue - related to link that have diff.
networks on each side> > The setup> > r1-----r2------r3------r4> > > On the
link that connects r2 to r3, each interface has different networks subnet
masks (22.22.22.22/28 for r2 and 33.33.33.33/30 for r3). All other links have
normal ips that are on the same network and work fine.> > Requirement: all
routers are to run rip. r2 and r3 must pass routing info between each other as
well as you must be able to route traffic from r1 to r4 and vice-versa. 'ip
unnumbered' cannot be used. no static / default routes of any kind can be
used.> > > Where I'm at: All routers can see routes from each other (used the
no validate-update-source to get the routes passed along....). However, r1 for
example cannot route to a network on r3 because full route recursion is not
happening because the next hop for r2 is 33.33.33.33 (the interface directly
connected to r3) and when doing a route lookup for 33.33.33.33, there is no
recursion to an interface. a static route pointing traffic destined for the
netx hops of 22.22.22.22, etc. to the serial interface can fix this but i
cannot use statics for this.> > Any ideas would be greatly appreciated. > >
Joe> >
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:30 ARST