From: John Kim (albugkim@hotmail.com)
Date: Tue Dec 11 2007 - 17:07:59 ART
The data size is in G Byte, but NIC speed is in M bit.
The calculation comes about 6 min * 8 = 48 min.
Thanks,
John Kim> Date: Tue, 11 Dec 2007 16:18:51 +0100> From:
wilhelm@boeddinghaus.de> To: itsfortarget@gmail.com> CC:
ccielab@groupstudy.com> Subject: Re: NEED HELP..................> > Hi,> >
there are many different linecards for the 6500 series. Which gigabit>
linecard do you have? Have you got a switchfabric in the switch?> > If you
have 6148 or 6548 cards do not give the servers ports next to> each other. On
some cards 8 or 12 ports share buffer and memory.> > Greetings> > Wilhelm> > >
itsfortarget iwillgetit schrieb:> > Dear Group,> >> > Pls find a solution for
this problem.> >> > I have two server connected to a 6509 Switch's Gigabit
ethernet> > Ports.Oneserver(old)'s Bandwidth is 100 Mbps.> >> > I have to copy
data having size of 35 GB from Old to new ,Copying delayed so> > much.> >> >
*Suppose the data transfer takes place at 100 Mbps Because Old is working in>
> 100 Mbps.> >> > Then it should take* 5.973333333 *Minutes(ie 35 GB / 100
MB)> >> > *But it takes *43* Minutes.> >> > *Both NICs are full duplex> >> >
*I have checked Auto negotiation.> >> >
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:30 ARST