From: Wilhelm Boeddinghaus (wilhelm@boeddinghaus.de)
Date: Tue Dec 11 2007 - 12:18:51 ART
Hi,
there are many different linecards for the 6500 series. Which gigabit
linecard do you have? Have you got a switchfabric in the switch?
If you have 6148 or 6548 cards do not give the servers ports next to
each other. On some cards 8 or 12 ports share buffer and memory.
Greetings
Wilhelm
itsfortarget iwillgetit schrieb:
> Dear Group,
>
> Pls find a solution for this problem.
>
> I have two server connected to a 6509 Switch's Gigabit ethernet
> Ports.Oneserver(old)'s Bandwidth is 100 Mbps.
>
> I have to copy data having size of 35 GB from Old to new ,Copying delayed so
> much.
>
> *Suppose the data transfer takes place at 100 Mbps Because Old is working in
> 100 Mbps.
>
> Then it should take* 5.973333333 *Minutes(ie 35 GB / 100 MB)
>
> *But it takes *43* Minutes.
>
> *Both NICs are full duplex
>
> *I have checked Auto negotiation.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:30 ARST