From: Chris Riling (criling@gmail.com)
Date: Sat Dec 08 2007 - 12:05:44 ART
I believe you can also use the BGP TTL security check feature to accomplish
this is they tell you not to use eBGP multihop...
Chris
On Dec 8, 2007 8:23 AM, itsfortarget iwillgetit <itsfortarget@gmail.com>
wrote:
> The default TTL value of EBGP message is 1.Now if you want a peering
> between routers using any interface than connected interface, the TTL
> value
> shoud be increased as the hop number of hop count.So to manipulate the
> default TTL value ebgp multi hope is used.In the case of IBGP peering this
> command is not required as its default TTL is high.
> Hope this will clear u.
>
> On Dec 8, 2007 6:15 PM, Henry Ugwuadu <ugwuadu@gmail.com> wrote:
>
> > Hello All,
> >
> > What is the rational for using the command ebgp-multihop for a
> > situation where u want the bgp connect even if the frame relay
> > connection between two routers fails.?
> >
> > Henry
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:29 ARST