From: itsfortarget iwillgetit (itsfortarget@gmail.com)
Date: Sat Dec 08 2007 - 03:37:15 ART
I WAS ASKED THIS QUESTIAN IN INTERNIEW WITH CISCO....
On Dec 8, 2007 6:00 AM, Darby Weaver <darbyweaver@yahoo.com> wrote:
> Good advice Shiran. Also noted that it is a good
> thing to try in practice. All things considered, a
> guy just mentioned this happened to him... on his
> fateful day.
>
>
> --- shiran guez <shiranp3@gmail.com> wrote:
>
> > the mode of the VTP is only management it doesn't
> > meter if it is a client or
> > server, the job of a client is to listen and update
> > his local DB, but to do
> > it interesting take one of your client switches that
> > have on him VLAN
> > information and put him with a new Server Client
> > enviorment that is clean
> > from and vlan information (revision 0) or see that
> > the revision number of
> > the client you put is higher then the new
> > enviorment.
> >
> > all the information on the higher revision switch
> > will be propagated to your
> > new enviorment even tough it is a client. (Assuming
> > the Domain Name is the
> > same and password in case there is one).
> >
> >
> >
> > On Dec 7, 2007 9:33 PM, itsfortarget iwillgetit
> > <itsfortarget@gmail.com>
> > wrote:
> >
> > > Hi Shiran,
> > >
> > > Are you sure that in Client mode switch VLAN info
> > stored in vlan.dat? I
> > > think it is not the case..
> > >
> > > On Dec 8, 2007 1:00 AM, shiran guez
> > <shiranp3@gmail.com> wrote:
> > >
> > > > The VLAN Information in every switch is stored
> > in the vlan database in a
> > > > file called vlan.dat you can see it in your
> > flash directory.
> > > >
> > > > the VTP is used to manage the vlan database
> > either locally using
> > > > transparent or remotely using the client server.
> > > >
> > > > you can change the modes without effecting the
> > vlan database, the vlan
> > > > database will change only when you add or remove
> > information to it not when
> > > > you change the method of how to add or remove
> > information.
> > > >
> > > >
> > > >
> > > >
> > > > On Dec 7, 2007 8:00 PM, itsfortarget
> > iwillgetit <
> > > > itsfortarget@gmail.com> wrote:
> > > >
> > > > > Someone, could you please come up , why the
> > VLAN info still
> > > > > retained??
> > > > >
> > > > > On Dec 7, 2007 8:18 PM, Alexander Belov
> > <abelov@technoserv.ru> wrote:
> > > > >
> > > > > > Why would it loose the vlan info after
> > restart? ;)
> > > > > >
> > > > > > Somenone should kill the vlan.dat
> > firstly....
> > > > > >
> > > > > >
> > > > > >
> > > > > > -----Original Message-----
> > > > > > From: nobody@groupstudy.com [mailto:
> > nobody@groupstudy.com ] On
> > > > > Behalf Of
> > > > > > Joseph Saad
> > > > > > Sent: Friday, December 07, 2007 5:17 PM
> > > > > > To: Cisco certification
> > > > > > Subject: Re: NEED HELP...
> > > > > >
> > > > > > Server and client store the vlan information
> > in vlan.dat
> > > > > > Transparent stores it in running-config and
> > you save it in
> > > > > startup-config.
> > > > > >
> > > > > > Your clients will be OK till your restart
> > any or all the switches.
> > > > > >
> > > > > > You'll lose all your vlan information on
> > restarting a switch.
> > > > > >
> > > > > > Joseph.
> > > > > >
> > > > > > On Dec 7, 2007 6:00 PM, itsfortarget
> > iwillgetit <itsfortarget@gmail.com
> > > > > >
> > > > > > wrote:
> > > > > >
> > > > > > > Dear Team,
> > > > > > >
> > > > > > > Hope all doing good.Let me narrate my
> > doubt below....
> > > > > > >
> > > > > > > I have 4 switches, say SW1, SW2,SW3 and
> > SW4.SW1 is VTP server and
> > > > > > > remaining
> > > > > > > are client. Now suppose all the VLAN
> > information is synchronised
> > > > > between
> > > > > > > Server and Client
> > > > > > > and LAN is up and running smooth.Let's
> > suppose,now the VTP mode of
> > > > > all
> > > > > > > client changing in to Transparent mode,
> > will this changes effect
> > > > > my
> > > > > > users?
> > > > > > > my transparent switches will retain the
> > VLAN information obtained
> > > > > from
> > > > > > > Server?
> > > > > > >
> > > > > > > Hope you all will interact.
> > > > > > >
> > > > > > > Regards.
> > > > > > >
> > > > > > >
> > > > >
> >
> _______________________________________________________________________
> > > > > > > Subscription information may be found at:
> > > > > > >
> > http://www.groupstudy.com/list/CCIELab.html
> > > > > >
> > > > > >
> > > > >
> >
> _______________________________________________________________________
> > > > > > Subscription information may be found at:
> > > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > > >
> > > > > >
> > > > >
> >
> _______________________________________________________________________
> > > > > > Subscription information may be found at:
> > > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > >
> > > > >
> >
> _______________________________________________________________________
> > > > >
> > > > > Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Shiran Guez
> > > > MCSE CCNP NCE1
> > > > http://cciep3.blogspot.com
> > > > http://www.linkedin.com/in/cciep3
> > >
> > >
> > >
> >
> >
> > --
> > Shiran Guez
> > MCSE CCNP NCE1
> > http://cciep3.blogspot.com
> > http://www.linkedin.com/in/cciep3
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:29 ARST