From: Gary Duncanson (gary.duncanson@googlemail.com)
Date: Fri Dec 07 2007 - 15:42:40 ART
Fellas,
I think I will make the peace here as I was I think the first to reply to
this thread..
Can we all just get along? It's a long journey and sooner or later I'm sure
we all feel we have been 'spiked' by someone on the mailing list even if
it's unjustified, we just don't like it or we simply misunderstand the
intentions of the sender of the email response.
Personally I think Scott's shut down and activate as required approach is
methodical and may very well try it for a while to assess it's merits for
myself. Perhaps I won't like it.
All of you provide extremely useful content to the mailing list but let's
not be too quick to mail something that might be interpreted as CCIE
according to garp picky criticism of a considered 'what works for me'
response to a question on the list.
Anyone not agree unicast me. I can assure you my shoulders are broad enough.
Gary
----- Original Message -----
From: "Anthony Sequeira" <Anthony_Sequeira@skillsoft.com>
To: "Scott Vermillion" <scott_ccie_list@it-ag.com>; "Gary Duncanson"
<gary.duncanson@googlemail.com>; "Ranjith Samuel"
<ranjith_samuel@hotmail.com>
Cc: <ccielab@groupstudy.com>
Sent: Friday, December 07, 2007 6:14 PM
Subject: RE: Shutting unused interface CCIE lab
Sorry you were so offended by my overuse of exclamation points. You are
obviously taking this thread very personally.
Telling me to get a life is wildly inappropriate. Too bad this list is
not moderated.
You do, however, bring up an excellent point that obtaining success in
the lab is a personal approach kind of thing. While I do not
particularly like your approach here, it could certainly work for you I
am sure.
I sincerely hope you pass soon using whatever approach works for you.
Anthony J. Sequeira
#15626
-----Original Message-----
From: Scott Vermillion [mailto:scott_ccie_list@it-ag.com]
Sent: Friday, December 07, 2007 1:05 PM
To: Anthony Sequeira; 'Gary Duncanson'; 'Ranjith Samuel'
Cc: ccielab@groupstudy.com
Subject: RE: Shutting unused interface CCIE lab
OK ANTHONY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!TO EACH
HIS
OWN, WOULDN'T YOU
SAY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!???????????????????????
????
?????????????????????????????
Get a life folks...
-----Original Message-----
From: Anthony Sequeira [mailto:Anthony_Sequeira@skillsoft.com]
Sent: Thursday, December 06, 2007 11:05 PM
To: Scott Vermillion; Gary Duncanson; Ranjith Samuel
Cc: ccielab@groupstudy.com
Subject: RE: Shutting unused interface CCIE lab
I am not shutting down a darn thing unless a task explicitly or
implicitly requires it!!!!!!!!!!!!
In fact this is my rule for anything I go to do at that keyboard in the
lab!
The only thing I can recall doing that they did not ask me to was a full
connectivity test (TCL Script) and other necessary verifications. Notice
that these verifications do not actually change anything!
Anthony J. Sequeira
#15626
Recert? No Problem!
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Scott Vermillion
Sent: Thursday, December 06, 2007 7:44 PM
To: 'Gary Duncanson'; 'Ranjith Samuel'
Cc: ccielab@groupstudy.com
Subject: RE: Shutting unused interface CCIE lab
We had this discussion just this week. I offered that I like to shut
everything down using the interface range command and then enable things
individually as I configure/verify. It occurred to me yesterday as I
was
starting a new lab that the other advantage this has is ensuring that
you
don't forget to shut your physical ports when doing PortChannels.
At the end of the day, it's not a big overall impact one way or the
other.
Just pick an approach you're comfortable with and stick with it
always...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Gary
Duncanson
Sent: Thursday, December 06, 2007 5:33 PM
To: Ranjith Samuel
Cc: ccielab@groupstudy.com
Subject: Re: Shutting unused interface CCIE lab
Well I think if the port is 'unused' in it's purest sense then it's
probably
shutdown anyway to be fair.
Main thing is of course to follow requirements but also to apply common
sense
as well as best practice. If making sure an interface is shut down helps
you
out then I would say do it. Just makes sure you don't break something
you
need!
Gary
----- Original Message -----
From: Ranjith Samuel
To: Gary Duncanson ; uyota oyearone
Cc: ccielab@groupstudy.com
Sent: Friday, December 07, 2007 12:10 AM
Subject: RE: Shutting unused interface CCIE lab
I think you will be wasting your time doing this. On the contrary ,
you
might have to unshut some ports to get your topology working. My advice
is
not
to spend time doing tasks that are not required in the exam because you
will
need every minute of it. No marks for perfection!!!
------------------------------------------------------------------------
---- - - > To: spycharlies@hotmail.com > CC: ccielab@groupstudy.com > Subject: Re: Shutting unused interface CCIE lab > Date: Thu, 6 Dec 2007 22:40:59 +0000 > From: gary.duncanson@googlemail.com > > I suppose so. > ----- Original Message ----- > From: "uyota oyearone" <spycharlies@hotmail.com> > To: "CCIE" <ccielab@groupstudy.com> > Sent: Thursday, December 06, 2007 10:04 PM > Subject: Shutting unused interface CCIE lab > > > > Hi Group, > > > > While studying for my lab, i always have an habit of shutting down unused > > interface so they do not trunk dynamically. > > > > Is this advisable in the actual CCIE lab ? > > > > cheers :- > > > > > > > > > > > > > > > > _________________________________________________________________ > > Read what Santa`s been up to! For all the latest, visit > > asksantaclaus.spaces.live.com! > > http://asksantaclaus.spaces.live.com/ > > > >
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:29 ARST