From: Joe Rinehart (jjrinehart@hotmail.com)
Date: Sun Nov 25 2007 - 19:07:30 ART
-----Original Message-----
From: Joe Rinehart [mailto:jjrinehart@hotmail.com]
Sent: Tuesday, November 20, 2007 9:24 AM
To: 'Cisco certification'
Subject: Multicast Mapping
I have a weird question...
I am trying to configure paging on a small (under 40) network with a
2811 and 3560 Standard Image network with 7941 phones. With the 10 host
limit on a paging group and no multicast routing on the switch the customer
would need the enhanced image to do this but they have had to deal enough
with cost overruns. The link between the router and switch is currently a
routed port but I have toyed with the idea of making it a trunk to carry the
voice VLAN and just map the paging as a directed broadcast to the voice vlan
(a /24 network).
Is there a simple way to map this and get it to work?
Joe Rinehart, MBA, CCIE #14256, CCNP, CCDP Systems Engineer Cisco Unified
Communications
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:31 ART