From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sun Nov 25 2007 - 09:44:58 ART
Using Dynamips for CCIE Lab Preparation on Mac OS X
http://www.internetworkexpert.com/resources/ccie_dynamips_mac_osx.htm
Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
>----- Original Message -----
Subject: Re: Dynamips ie4.01 + four 3750s
Date: Sun, November 25, 2007 4:12
From: "henro" <ugwuadu@gmail.com>
> How can I run Dynamips on 2.2GHz, 2GB memeory Mac OS X Leopard?
>
>
> On Nov 25, 2007 7:29 AM, shiran guez <shiranp3@gmail.com> wrote:
> > kevin
> >
> > I have also Intel Core Duo 3gig with 2GB Memory 2CL So it is a very
fast PC
> > but Before you start do a small experiment as it will save you a lot of
> > frustration:
> >
> > on you win xp:
> > start only 3 routers and connect them over FR and try to ping from one to
> > another, add ospf or eigrp and try again
> >
> > then install linux on that same pc (dual boot) run it on init 3:
> > try the same thing
> >
> >
> > you will clearly see a performance difference with a full lab if you will
> > run it more then 4 hours you will have some wired problems that you would
> > not encounter on the real equipment, also have as much cooling as
possible.
> >
> >
> > On Nov 25, 2007 5:40 AM, <kevin.m.dalby@accenture.com> wrote:
> >
> > > Hi Scott,
> > >
> > > Would it be something like this?
> > >
> > > [[Router R1]]
> > > model = 3640
> > > console = 2001
> > > autostart = false
> > > slot0 = NM-1FE-TX
> > > slot1 = NM-4T
> > >
> > > F0/0 = NIO_gen_eth:\Device\NPF_{B00A38DD-F10B-43B4-99F4-B4A078484487}
> > > # Connects to SW1 F1/0/1
> > >
> > > I wasn't sure since i'm using usb's, also how would you
differentiate to
> > > the four real switches, do the cisco ports have NPFs?
> > >
> > > As far as using XP, I figured I would give it a go. It's a core 2
duo 3.0gig, if
> that doesn't do it, i've heard good things about the apple mini.
> >
> > >
> > > Thanks for your help.
> > >
> > > Kevin
> > >
> > >
> > > ________________________________
> > >
> > > From: Scott Vermillion [mailto:scott_ccie_list@it-ag.com]
> > > Sent: Sat 11/24/2007 9:14 PM
> > > To: Dalby, Kevin M.; ccielab@groupstudy.com
> > > Cc: bmcgahan@internetworkexpert.com
> > > Subject: RE: Dynamips ie4.01 + four 3750s
> > >
> > >
> > >
> > > Hey Kevin,
> > >
> > > Hope that XP machine is a hog. To run a full IEWB topology and then
all
> > > of
> > > the stuff that the actual IEWB labs call for will be a tall order for
> > > Windows. Bear in mind (and I'm not kidding) that the developers of
> > > Dynamips/Dynagen actually recommend that you attempt to run your
virtual
> > > network on a toaster before attempting to do so on a Windows box!
> > >
> > > Look again at the tutorial. You're trying to use Linux/OS X syntax on
> > > Windows. The Windows syntax is explained in "Communicating With Real
> > > Networks."
> > >
> > > Seriously, if you're going to be doing full-scale CCIE labs, you
need to
> > > consider a different OS. I had some success on a Server 2003
machine with
> > > 4
> > > x CPUs and 4 GB of RAM, but your run-of-the-mill XP box is very, very
> > > likely
> > > to fail under the strain. Adjacencies begin to flap and all kinds of
> > > other
> > > unpredictable things are likely to happen as you begin to introduce
> > > routing
> > > protocols, etc into your configs. Windows is really best suited as
a test
> > > drive of Dynamips or for very small topologies.
> > >
> > > Regards,
> > >
> > > Scott
> > >
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > > kevin.m.dalby@accenture.com
> > > Sent: Saturday, November 24, 2007 5:21 PM
> > > To: ccielab@groupstudy.com
> > > Cc: bmcgahan@internetworkexpert.com
> > > Subject: Dynamips ie4.01 + four 3750s
> > >
> > > Hello All,
> > > I'm attaching four 48 port 3750's to the standard
> > > "ie.routing.and.switching.topology.4.01" The following .net (below)
gives
> > > me
> > > a 206 Error: 206-unable to create generic ethernet NIO.
> > >
> > > Topology:
> > > Dynamips on Windows
XP(dynagen-0.10.1_dynamips-0.8.0-RC1_Win_XP_setup.exe)
> > > --> two seven port USB hubs with RJ45 adapters--->four 48 port 3750s
> > > 12.2(25)SEE4
> > >
> > > The part I get lost on is how does the eth0 in R1t tell dynamips to
> > > connect
> > > to the real 3750, SW1 F1/0/1?
> > >
> > > [[Router R1]]
> > > model = 3640
> > > console = 2001
> > > autostart = false
> > > slot0 = NM-1FE-TX
> > > slot1 = NM-4T
> > > F0/0 = NIO_gen_eth:eth0
> > > # Connects to SW1 F1/0/1
> > >
> > > So far I've been referencing the following:
> > > http://7200emu.hacki.at/viewtopic.php?t=2754&highlight=3550
> > > http://7200emu.hacki.at/viewtopic.php?t=2968&highlight=3550
> > > www.networkgremlins.com/files/lab.net.new
> > > www.Dynagen.org/tutorial.htm <http://www.dynagen.org/tutorial.htm>
> >
> > >
> > > Thanks in advance.
> > >
> > > Kevin
> > >
> > >
> > > ############################################################################
> > > ##################
> > > #
> > > # Internetwork Expert Routing & Switching topology Version 4.0
mappings
> > > for
> > > dynamips/dynagen
> > > # by: Brian McGahan, CCIE #8593
> > > # bmcgahan@internetworkexpert.com
> > > #
> > > # For more information:
> > > # Dynamips: http://www.ipflow.utc.fr/index.php/Cisco_7200_Simulator
> > > # Dynagen: http://dyna-gen.sourceforge.net/
> > > # Hacki's Forum: http://hacki.at/7200emu/index.php
> > > # Internetwork Expert's Forum: http://forum.internetworkexpert.com <
> > > http://forum.internetworkexpert.com/>
> > > #
> > >
> > > ############################################################################
> > > ##################
> > > ##################################################
> > > #
> > > # Define global router parameters for instance 1
> > > #
> > > ##################################################
> > > autostart=false
> > > [localhost:7200]
> > > workingdir = C:\Program
> > > Files\Dynamips\sample_labs\internetworkexpert\working
> > > [[3640]]
> > > #
> > > # Specify 3640 IOS image on Windows here:
> > > image = C:\Program Files\Dynamips\images\c3640-jk9o3s-mz.123-14.T7.bin
> > > #
> > > # Specify 3640 IOS image on Linux here:
> > > # image = /ios/c3640-jk9o3s-mz.123-14.T7.extracted.bin
> > > #
> > > ram = 128
> > > disk0 = 0
> > > disk1 = 0
> > > # Choose an idlepc value from the below
> > > idlepc = 0x60530870
> > > # idlepc = 0x60530890
> > > # idlepc = 0x60530a58
> > > # idlepc = 0x60530abc
> > > # idlepc = 0x605310c4
> > > # idlepc = 0x605e92e8
> > > # idlepc = 0x605e9364
> > > # idlepc = 0x60531394
> > > # idlepc = 0x605313d0
> > > # idlepc = 0x605313ec
> > > mmap = true
> > > # ghostios = true
> > >
> > > ###########################
> > > #
> > > # Define router instances
> > > #
> > > ###########################
> > > [[Router R1]]
> > > model = 3640
> > > console = 2001
> > > autostart = false
> > > slot0 = NM-1FE-TX
> > > slot1 = NM-4T
> > > F0/0 = NIO_gen_eth:eth0
> > > # Connects to SW1 F1/0/1
> > > S1/0 = FRSW 1
> > > cnfg = C:\Program
> > >
> > > Files\Dynamips\sample_labs\internetworkexpert\initial.configs\R1.initial.con
> > > fig.txt
> > > [[Router R2]]
> > > model = 3640
> > > console = 2002
> > > autostart = false
> > > slot0 = NM-1FE-TX
> > > slot1 = NM-4T
> > > f0/0 = NIO_gen_eth:eth1
> > > # Connects to SW2 F1/0/2
> > > S1/0 = FRSW 2
> > > cnfg = C:\Program
> > >
> > > Files\Dynamips\sample_labs\internetworkexpert\initial.configs\R2.initial.con
> > > fig.txt
> > > [[Router R3]]
> > > model = 3640
> > > console = 2003
> > > autostart = false
> > > slot0 = NM-4E
> > > slot1 = NM-4T
> > > S1/0 = FRSW 3
> > > S1/1 = FRSW 13
> > > S1/2 = R1 S1/1
> > > S1/3 = R2 S1/1
> > > e0/0 = NIO_gen_eth:eth2
> > > # Connects to SW1 F1/0/3
> > > e0/1 = NIO_gen_eth:eth7
> > > # Connects to SW3 F1/0/3
> > > cnfg = C:\Program
> > >
> > > Files\Dynamips\sample_labs\internetworkexpert\initial.configs\R3.initial.con
> > > fig.txt
> > > [[Router R4]]
> > > model = 3640
> > > console = 2004
> > > autostart = false
> > > slot0 = NM-4E
> > > slot1 = NM-4T
> > > e0/0 = NIO_gen_eth:eth3
> > > # Connects to SW2 F1/0/4
> > > e0/1 = NIO_gen_eth:eth8
> > > # Connects to SW4 F1/0/4
> > > S1/0 = FRSW 4
> > > S1/1 = R5 S1/1
> > > cnfg = C:\Program
> > >
> > > Files\Dynamips\sample_labs\internetworkexpert\initial.configs\R4.initial.con
> > > fig.txt
> > > [[Router R5]]
> > > model = 3640
> > > console = 2005
> > > autostart = false
> > > slot0 = NM-4E
> > > slot1 = NM-4T
> > > e0/0 = NIO_gen_eth:eth5
> > > # Connects to SW1 F1/0/5
> > > e0/1 = NIO_gen_eth:eth9
> > > # Connects to SW3 F1/0/5
> > > S1/0 = FRSW 5
> > > cnfg = C:\Program
> > >
> > > Files\Dynamips\sample_labs\internetworkexpert\initial.configs\R5.initial.con
> > > fig.txt
> > > [[Router R6]]
> > > model = 3640
> > > console = 2006
> > > autostart = false
> > > slot0 = NM-4E
> > > slot1 = NM-4T
> > > e0/0 = NIO_gen_eth:eth6
> > > # Connects to SW2 F1/0/6
> > > e0/1 = NIO_gen_eth:eth10
> > > # Connects to SW4 F1/0/6
> > > S1/0 = FRSW 6
> > > cnfg = C:\Program
> > >
> > > Files\Dynamips\sample_labs\internetworkexpert\initial.configs\R6.initial.con
> > > fig.txt
> > >
> > >
> > > ##################################################
> > > #
> > > # Define global router parameters for instance 2
> > > #
> > > ##################################################
> > > [localhost:7201] # Talk to the 2nd dynamips process on port 7201
> > > udp = 11000 # Change the base udp port to 11000 (the default is
> > > 10000)
> > > workingdir = C:\Program
> > > Files\Dynamips\sample_labs\internetworkexpert\working
> > > [[3640]]
> > > #
> > > # Specify 3640 IOS image on Windows here:
> > > image = C:\Program Files\Dynamips\images\c3640-jk9o3s-mz.123-14.T7.bin
> > > #
> > > # Specify 3640 IOS image on Linux here:
> > > # image = /ios/c3640-jk9o3s-mz.123-14.T7.extracted.bin
> > > #
> > > ram = 128
> > > disk0 = 0
> > > disk1 = 0
> > > # Choose an idlepc value from the below
> > > idlepc = 0x60530870
> > > # idlepc = 0x60530890
> > > # idlepc = 0x60530a58
> > > # idlepc = 0x60530abc
> > > # idlepc = 0x605310c4
> > > # idlepc = 0x605e92e8
> > > # idlepc = 0x605e9364
> > > # idlepc = 0x60531394
> > > # idlepc = 0x605313d0
> > > # idlepc = 0x605313ec
> > > mmap = true
> > > # ghostios = true
> > >
> > >
> > > ###########################
> > > #
> > > # Define router instances
> > > #
> > > ###########################
> > >
> > > [[Router BB1]]
> > > model = 3640
> > > console = 2011
> > > autostart = false
> > > slot1 = NM-4T
> > > S1/0 = BB3 S1/0
> > > S1/1 = FRSW 21
> > > cnfg = C:\Program
> > >
> > > Files\Dynamips\sample_labs\internetworkexpert\initial.configs\BB1.initial.co
> > > nfig.txt
> > > [[Router BB2]]
> > > model = 3640
> > > console = 2012
> > > autostart = false
> > > slot0 = NM-4E
> > > e0/0 = NIO_gen_eth:eth1
> > > # Connects to SW2 F1/0/24
> > > cnfg = C:\Program
> > >
> > > Files\Dynamips\sample_labs\internetworkexpert\initial.configs\BB2.initial.co
> > > nfig.txt
> > > [[Router BB3]]
> > > model = 3640
> > > console = 2013
> > > autostart = false
> > > slot0 = NM-4E
> > > slot1 = NM-4T
> > > e0/0 = NIO_gen_eth:eth2
> > > # Connects to SW2 F1/0/24
> > > cnfg = C:\Program
> > >
> > > Files\Dynamips\sample_labs\internetworkexpert\initial.configs\BB3.initial.co
> > > nfig.txt
> > > [[Router TermServ]]
> > > model = 3640
> > > console = 2000
> > > autostart = false
> > > #
> > > # Specify your local host's loopback here from the network device list
> > > # Too add a loopback in windows:
> > > # http://support.microsoft.com/kb/839013
> > > #
> > > # E0/0 =
NIO_gen_eth:\Device\NPF_{4065B11C-2A6C-4FD2-8204-A12A9A8328A4}
> > > cnfg = C:\Program
> > >
> > > Files\Dynamips\sample_labs\internetworkexpert\initial.configs\RSTermServ.ini
> > > tial.config.txt
> > > [[FRSW FRSW]]
> > > # R1 to FRSW
> > > 1:102 = 2:201
> > > 1:103 = 3:301
> > > 1:113 = 13:311
> > > 1:104 = 4:401
> > > 1:105 = 5:501
> > > # R2 to FRSW
> > > 2:203 = 3:302
> > > 2:213 = 13:312
> > > 2:204 = 4:402
> > > 2:205 = 5:502
> > > # R3 to FRSW
> > > 3:304 = 4:403
> > > 3:305 = 5:503
> > > 13:314 = 4:413
> > > 13:315 = 5:513
> > > # R4 to FRSW
> > > 4:405 = 5:504
> > > # R6 to FRSW
> > > 6:51 = 21:51
> > > 6:100 = 21:100
> > > 6:101 = 21:101
> > > 6:201 = 21:201
> > > 6:301 = 21:301
> > > 6:401 = 21:401
> > >
> > >
> > >
> > > This message is for the designated recipient only and may contain
> > > privileged, proprietary, or otherwise private information. If you have
> > > received it in error, please notify the sender immediately and
delete the
> > > original. Any other use of the email by you is prohibited.
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > >
> > >
> > >
> > > This message is for the designated recipient only and may contain
> > > privileged, proprietary, or otherwise private information. If you have
> > > received it in error, please notify the sender immediately and
delete the
> > > original. Any other use of the email by you is prohibited.
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> >
> >
> >
> > --
> > Shiran Guez
> > MCSE CCNP NCE1
> > http://cciep3.blogspot.com
> > http://www.linkedin.com/in/cciep3
> >
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:31 ART