From: Scott Vermillion (scott_ccie_list@it-ag.com)
Date: Sat Nov 24 2007 - 23:14:56 ART
Hey Kevin,
Hope that XP machine is a hog. To run a full IEWB topology and then all of
the stuff that the actual IEWB labs call for will be a tall order for
Windows. Bear in mind (and I'm not kidding) that the developers of
Dynamips/Dynagen actually recommend that you attempt to run your virtual
network on a toaster before attempting to do so on a Windows box!
Look again at the tutorial. You're trying to use Linux/OS X syntax on
Windows. The Windows syntax is explained in "Communicating With Real
Networks."
Seriously, if you're going to be doing full-scale CCIE labs, you need to
consider a different OS. I had some success on a Server 2003 machine with 4
x CPUs and 4 GB of RAM, but your run-of-the-mill XP box is very, very likely
to fail under the strain. Adjacencies begin to flap and all kinds of other
unpredictable things are likely to happen as you begin to introduce routing
protocols, etc into your configs. Windows is really best suited as a test
drive of Dynamips or for very small topologies.
Regards,
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
kevin.m.dalby@accenture.com
Sent: Saturday, November 24, 2007 5:21 PM
To: ccielab@groupstudy.com
Cc: bmcgahan@internetworkexpert.com
Subject: Dynamips ie4.01 + four 3750s
Hello All,
I'm attaching four 48 port 3750's to the standard
"ie.routing.and.switching.topology.4.01" The following .net (below) gives me
a 206 Error: 206-unable to create generic ethernet NIO.
Topology:
Dynamips on Windows XP(dynagen-0.10.1_dynamips-0.8.0-RC1_Win_XP_setup.exe)
--> two seven port USB hubs with RJ45 adapters--->four 48 port 3750s
12.2(25)SEE4
The part I get lost on is how does the eth0 in R1t tell dynamips to connect
to the real 3750, SW1 F1/0/1?
[[Router R1]]
model = 3640
console = 2001
autostart = false
slot0 = NM-1FE-TX
slot1 = NM-4T
F0/0 = NIO_gen_eth:eth0
# Connects to SW1 F1/0/1
So far I've been referencing the following:
http://7200emu.hacki.at/viewtopic.php?t=2754&highlight=3550
http://7200emu.hacki.at/viewtopic.php?t=2968&highlight=3550
www.networkgremlins.com/files/lab.net.new
www.Dynagen.org/tutorial.htm
Thanks in advance.
Kevin
############################################################################
##################
#
# Internetwork Expert Routing & Switching topology Version 4.0 mappings for
dynamips/dynagen
# by: Brian McGahan, CCIE #8593
# bmcgahan@internetworkexpert.com
#
# For more information:
# Dynamips: http://www.ipflow.utc.fr/index.php/Cisco_7200_Simulator
# Dynagen: http://dyna-gen.sourceforge.net/
# Hacki's Forum: http://hacki.at/7200emu/index.php
# Internetwork Expert's Forum: http://forum.internetworkexpert.com
#
############################################################################
##################
##################################################
#
# Define global router parameters for instance 1
#
##################################################
autostart=false
[localhost:7200]
workingdir = C:\Program
Files\Dynamips\sample_labs\internetworkexpert\working
[[3640]]
#
# Specify 3640 IOS image on Windows here:
image = C:\Program Files\Dynamips\images\c3640-jk9o3s-mz.123-14.T7.bin
#
# Specify 3640 IOS image on Linux here:
# image = /ios/c3640-jk9o3s-mz.123-14.T7.extracted.bin
#
ram = 128
disk0 = 0
disk1 = 0
# Choose an idlepc value from the below
idlepc = 0x60530870
# idlepc = 0x60530890
# idlepc = 0x60530a58
# idlepc = 0x60530abc
# idlepc = 0x605310c4
# idlepc = 0x605e92e8
# idlepc = 0x605e9364
# idlepc = 0x60531394
# idlepc = 0x605313d0
# idlepc = 0x605313ec
mmap = true
# ghostios = true
###########################
#
# Define router instances
#
###########################
[[Router R1]]
model = 3640
console = 2001
autostart = false
slot0 = NM-1FE-TX
slot1 = NM-4T
F0/0 = NIO_gen_eth:eth0
# Connects to SW1 F1/0/1
S1/0 = FRSW 1
cnfg = C:\Program
Files\Dynamips\sample_labs\internetworkexpert\initial.configs\R1.initial.con
fig.txt
[[Router R2]]
model = 3640
console = 2002
autostart = false
slot0 = NM-1FE-TX
slot1 = NM-4T
f0/0 = NIO_gen_eth:eth1
# Connects to SW2 F1/0/2
S1/0 = FRSW 2
cnfg = C:\Program
Files\Dynamips\sample_labs\internetworkexpert\initial.configs\R2.initial.con
fig.txt
[[Router R3]]
model = 3640
console = 2003
autostart = false
slot0 = NM-4E
slot1 = NM-4T
S1/0 = FRSW 3
S1/1 = FRSW 13
S1/2 = R1 S1/1
S1/3 = R2 S1/1
e0/0 = NIO_gen_eth:eth2
# Connects to SW1 F1/0/3
e0/1 = NIO_gen_eth:eth7
# Connects to SW3 F1/0/3
cnfg = C:\Program
Files\Dynamips\sample_labs\internetworkexpert\initial.configs\R3.initial.con
fig.txt
[[Router R4]]
model = 3640
console = 2004
autostart = false
slot0 = NM-4E
slot1 = NM-4T
e0/0 = NIO_gen_eth:eth3
# Connects to SW2 F1/0/4
e0/1 = NIO_gen_eth:eth8
# Connects to SW4 F1/0/4
S1/0 = FRSW 4
S1/1 = R5 S1/1
cnfg = C:\Program
Files\Dynamips\sample_labs\internetworkexpert\initial.configs\R4.initial.con
fig.txt
[[Router R5]]
model = 3640
console = 2005
autostart = false
slot0 = NM-4E
slot1 = NM-4T
e0/0 = NIO_gen_eth:eth5
# Connects to SW1 F1/0/5
e0/1 = NIO_gen_eth:eth9
# Connects to SW3 F1/0/5
S1/0 = FRSW 5
cnfg = C:\Program
Files\Dynamips\sample_labs\internetworkexpert\initial.configs\R5.initial.con
fig.txt
[[Router R6]]
model = 3640
console = 2006
autostart = false
slot0 = NM-4E
slot1 = NM-4T
e0/0 = NIO_gen_eth:eth6
# Connects to SW2 F1/0/6
e0/1 = NIO_gen_eth:eth10
# Connects to SW4 F1/0/6
S1/0 = FRSW 6
cnfg = C:\Program
Files\Dynamips\sample_labs\internetworkexpert\initial.configs\R6.initial.con
fig.txt
##################################################
#
# Define global router parameters for instance 2
#
##################################################
[localhost:7201] # Talk to the 2nd dynamips process on port 7201
udp = 11000 # Change the base udp port to 11000 (the default is 10000)
workingdir = C:\Program
Files\Dynamips\sample_labs\internetworkexpert\working
[[3640]]
#
# Specify 3640 IOS image on Windows here:
image = C:\Program Files\Dynamips\images\c3640-jk9o3s-mz.123-14.T7.bin
#
# Specify 3640 IOS image on Linux here:
# image = /ios/c3640-jk9o3s-mz.123-14.T7.extracted.bin
#
ram = 128
disk0 = 0
disk1 = 0
# Choose an idlepc value from the below
idlepc = 0x60530870
# idlepc = 0x60530890
# idlepc = 0x60530a58
# idlepc = 0x60530abc
# idlepc = 0x605310c4
# idlepc = 0x605e92e8
# idlepc = 0x605e9364
# idlepc = 0x60531394
# idlepc = 0x605313d0
# idlepc = 0x605313ec
mmap = true
# ghostios = true
###########################
#
# Define router instances
#
###########################
[[Router BB1]]
model = 3640
console = 2011
autostart = false
slot1 = NM-4T
S1/0 = BB3 S1/0
S1/1 = FRSW 21
cnfg = C:\Program
Files\Dynamips\sample_labs\internetworkexpert\initial.configs\BB1.initial.co
nfig.txt
[[Router BB2]]
model = 3640
console = 2012
autostart = false
slot0 = NM-4E
e0/0 = NIO_gen_eth:eth1
# Connects to SW2 F1/0/24
cnfg = C:\Program
Files\Dynamips\sample_labs\internetworkexpert\initial.configs\BB2.initial.co
nfig.txt
[[Router BB3]]
model = 3640
console = 2013
autostart = false
slot0 = NM-4E
slot1 = NM-4T
e0/0 = NIO_gen_eth:eth2
# Connects to SW2 F1/0/24
cnfg = C:\Program
Files\Dynamips\sample_labs\internetworkexpert\initial.configs\BB3.initial.co
nfig.txt
[[Router TermServ]]
model = 3640
console = 2000
autostart = false
#
# Specify your local host's loopback here from the network device list
# Too add a loopback in windows:
# http://support.microsoft.com/kb/839013
#
# E0/0 = NIO_gen_eth:\Device\NPF_{4065B11C-2A6C-4FD2-8204-A12A9A8328A4}
cnfg = C:\Program
Files\Dynamips\sample_labs\internetworkexpert\initial.configs\RSTermServ.ini
tial.config.txt
[[FRSW FRSW]]
# R1 to FRSW
1:102 = 2:201
1:103 = 3:301
1:113 = 13:311
1:104 = 4:401
1:105 = 5:501
# R2 to FRSW
2:203 = 3:302
2:213 = 13:312
2:204 = 4:402
2:205 = 5:502
# R3 to FRSW
3:304 = 4:403
3:305 = 5:503
13:314 = 4:413
13:315 = 5:513
# R4 to FRSW
4:405 = 5:504
# R6 to FRSW
6:51 = 21:51
6:100 = 21:100
6:101 = 21:101
6:201 = 21:201
6:301 = 21:301
6:401 = 21:401
This message is for the designated recipient only and may contain
privileged, proprietary, or otherwise private information. If you have
received it in error, please notify the sender immediately and delete the
original. Any other use of the email by you is prohibited.
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:31 ART