From: Carlos Trujillo Jimenez (nergal888@hotmail.com)
Date: Sun Nov 18 2007 - 15:37:52 ART
Hi Gregory.
I think, you must return the default value of the serial interface, but if
it is specified the access rate as it is in the example (512K) you muts
configure the cir to 512K to all the other dlcis.
>From: "Gregory Gombas" <ggombas@gmail.com>
>X-OriginalArrivalTime: 18 Nov 2007 18:19:30.0458 (UTC)
>FILETIME=[8FBEC7A0:01C82A0F]
>
>I noticed when you apply a map-class to a frame-relay subinterface you
>still need to enable traffic shaping on the main interface.
>When you enable traffic shaping on the main interface, does it
>automatically shape all DLCI's to 56k?
>
>So if you're requirement is to shape one DLCI but not impact the other
>DLCI's, would you need to manually configure the CIR for the other
>DLCI's? If so what value do you set them to if you don't know their
>CIR?
>
>Again this is from IE Lab 13 Task 6.3 where the solution guide shows
>DLCI 502 configured with a CIR 512k which is the access rate and I am
>wondering why would you shape at the access rate?
>
>Thanks,
>Greg
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:30 ART