From: Rana Bilal (rab_91@hotmail.com)
Date: Mon Nov 12 2007 - 19:45:01 ART
Guys-
IE work book 4.0 lab 3 task 1.7.... Please have a look at it. There is very
good understanding about both the commands documented there.
Both commands looks fine.. it depends on the question what is asked.
Do we need to enable to traps for TCP ??
OR it is stated that TCP traps should be send to a particular host.
I'm adding some info from the Doc cd as well.please read the following link
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12240se/scg/swsnmp.htm#wp1043530
Thanks,
Bilal
>From: "Mounir Mohamed" <mounir.ccieisa@gmail.com>
>Reply-To: "Mounir Mohamed" <mounir.ccieisa@gmail.com>
>To: CJ <693455@gmail.com>
>CC: "Cisco certification" <ccielab@groupstudy.com>
>Subject: Re: TCP traps
>Date: Tue, 13 Nov 2007 00:21:16 +0200
>
>You need both of this commands
>
>RackR1(config)#snmp-server enable traps tty
>RackR1(config)#snmp-server host 1.2.3.4 traps tty
>
>On Nov 12, 2007 6:00 PM, CJ <693455@gmail.com> wrote:
> > Hi guys
> >
> > does anyone know how to enable snmp traps for tcp connections?
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
>--
>Best Regards,
>Mounir Mohamed
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:29 ART