From: Rich Collins (nilsi2002@gmail.com)
Date: Sun Nov 11 2007 - 16:06:04 ART
I looked back at the original post which seemed all correct to me
except for this one line:
R1
---interface Serial0/0
frame-relay map ipv6 2001:CC1E:1:125::5 105 >>> need broadcast in addition
-Rich
On Nov 10, 2007 2:24 AM, R.S CCIE <r.s.cciestudy@gmail.com> wrote: > Also,as per the link to DOC CD. > > interface Serial 3 > > encapsulation frame-relay > > ipv6 address 2001:0DB8:2222:1044::46/64 > > frame-relay map ipv6 FE80::E0:F727:E400:A 17 broadcast <=====Link local > address > > frame-relay map ipv6 FE80::60:3E47:AC8:8 19 broadcast <=====Link local > address > > frame-relay map ipv6 2001:0DB8:2222:1044::72 19 > > frame-relay map ipv6 2001:0DB8:2222:1044::73 17 > > http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/ipv6_c/v6addres.htm#wp1050198 > > > On Nov 9, 2007 10:06 PM, Champika <693455@gmail.com> wrote: > > > > Dear Group > > > > fa0/0--R5--s0/0--FR--s0/0--R1--s0/0--FR--s0/0--R2 > > > > R1 is the hub and IPV6 rip is running between them. The problem is i > > can see IPV6 rip updates from R5 and R2 in R1, and also the R5 fa0/0 > > rip route is seen in R2. > > (split horizon is disabled in R1). R2 is getting a default route from > > another router for RIP. > > I dont seem to get any rip routes in R5. Can someone please tell me > > whats wrong here. > > > > Configs > > ===== > > R5 > > --- > > ! > > interface Serial0/0 > > ip address 191.1.125.5 255.255.255.0 > > ip pim dense-mode > > encapsulation frame-relay > > no ip route-cache cef > > no ip route-cache > > ip ospf authentication message-digest > > ip ospf message-digest-key 1 md5 CISCO > > ip ospf priority 0 > > ipv6 address 2001:CC1E:1:125::5/64 > > ipv6 address FE80::5 link-local > > ipv6 rip RIPng enable > > frame-relay map ipv6 FE80::2 501 > > frame-relay map ipv6 2001:CC1E:1:125::1 501 broadcast > > frame-relay map ipv6 2001:CC1E:1:125::2 501 > > frame-relay map ip 191.1.125.1 501 broadcast > > frame-relay map ip 191.1.125.2 501 > > frame-relay map ipv6 FE80::1 501 > > no frame-relay inverse-arp > > end > > > > Rack1R5#sh run int f0/0 > > Building configuration... > > > > Current configuration : 206 bytes > > ! > > interface FastEthernet0/0 > > ip address 191.1.5.5 255.255.255.0 > > ip pim dense-mode > > ip igmp helper-address 192.1.125.1 > > duplex auto > > speed auto > > ipv6 address 2001:CC1E:1:5::5/64 > > ipv6 rip RIPng enable > > end > > > > R1 > > --- > > > > interface Serial0/0 > > ip address 191.1.125.1 255.255.255.0 > > ip pim neighbor-filter R5 > > ip pim dense-mode > > encapsulation frame-relay > > no ip route-cache cef > > no ip route-cache > > ip ospf authentication message-digest > > ip ospf message-digest-key 1 md5 CISCO > > ipv6 address 2001:CC1E:1:125::1/64 > > ipv6 address FE80::1 link-local > > ipv6 rip RIPng enable > > frame-relay map ipv6 FE80::2 102 > > frame-relay map ip 191.1.125.5 105 broadcast > > frame-relay map ipv6 FE80::5 105 > > frame-relay map ipv6 2001:CC1E:1:125::2 102 broadcast > > frame-relay map ipv6 2001:CC1E:1:125::5 105 > > frame-relay map ip 191.1.125.2 102 broadcast > > no frame-relay inverse-arp > > end > > > > ipv6 router rip RIPng > > no split-horizon > > > > R2 > > --- > > > > interface Serial0/0 > > ip address 191.1.125.2 255.255.255.0 > > encapsulation frame-relay > > ip ospf authentication message-digest > > ip ospf message-digest-key 1 md5 CISCO > > ip ospf priority 0 > > ipv6 address 2001:CC1E:1:125::2/64 > > ipv6 address FE80::2 link-local > > ipv6 rip RIPng enable > > frame-relay map ip 191.1.125.5 201 > > frame-relay map ipv6 FE80::5 201 > > frame-relay map ipv6 2001:CC1E:1:125::1 201 broadcast > > frame-relay map ipv6 2001:CC1E:1:125::5 201 > > frame-relay map ip 191.1.125.1 201 broadcast > > frame-relay map ipv6 FE80::1 201 > > no frame-relay inverse-arp > > end > > > > > > --------------------------------- > > Show commands > > ============ > > > > R2 > > --- > > Rack1R2#sh ipv rout rip > > IPv6 Routing Table - 8 entries > > Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP > > U - Per-user Static route > > I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary > > O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2 > > ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2 > > R ::/0 [120/2] > > via FE80::20B:FDFF:FE12:46C0, Serial0/1 > > R 2001:CC1E:1:5::/64 [120/3] > > via FE80::1, Serial0/0 > > > > R1 > > ---- > > Rack1R1#sh ipv6 route rip > > IPv6 Routing Table - 7 entries > > Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP > > U - Per-user Static route > > I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary > > O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2 > > ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2 > > R ::/0 [120/3] > > via FE80::2, Serial0/0 > > R 2001:CC1E:1:5::/64 [120/2] > > via FE80::5, Serial0/0 > > R 2001:CC1E:1:23::/64 [120/2] > > via FE80::2, Serial0/0 > > > > R5 > > --- > > Rack1R5#sh ipv6 route rip > > IPv6 Routing Table - 6 entries > > Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP > > U - Per-user Static route > > I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary > > O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2 > > ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2 > > > > _______________________________________________________________________ > > Subscription information may be found at: > > http://www.groupstudy.com/list/CCIELab.html > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:29 ART