From: shiran guez (shiranp3@gmail.com)
Date: Sat Nov 10 2007 - 17:04:50 ART
R1 is the ABR for the NSSA so you will see the N2 sent from R6 ASBR as you
see now, and R1 as you can see in the DB did the translation for area 0 and
inside Area 0 on R5 you should see the E2, there is no preferance of N2 over
E2.
N2 is exactly the same as E2 but for routes that came from NSSA.
R1 is the translator meaning that he recive from R6 and you see the routes
recived on the routing table as they are valid and applying to the linkstate
rules. and then R1 is translating and sending out to area 0.
the concept of NSSA and Stub Areas is one exit only.
On Nov 10, 2007 9:32 PM, Joseph Saad <joseph.samir.saad@gmail.com> wrote:
> Here's an elaboration on the issue.
>
> R1
>
> R6 (A1) (A0) R5.
>
> R4
>
> R1, R4 and R6 shares the same VLAN and is in area 1.
> R1, R4 and R5 are on a Hub-n-spoke with R5 as the hub and is in area 0
> R6 is the ASBR (where I am doing redistribution of static subnets).
>
> Rack1R6(config-router)#do sh runn | s ip route|router ospf
> router ospf 1
> router-id 150.1.6.6
> log-adjacency-changes
> area 1 nssa
> redistribute static subnets
> network 150.1.6.6 0.0.0.0 area 1
> network 155.1.146.6 0.0.0.0 area 1
>
> ip route 160.1.6.0 255.255.255.0 Null0
>
>
> The first ABR
>
> Rack1R1#sh runn | s router ospf 1|ip route
>
> router ospf 1
> router-id 150.1.100.100
> log-adjacency-changes
> area 1 nssa
> network 150.1.1.1 0.0.0.0 area 1
> network 155.1.0.1 0.0.0.0 area 0
> network 155.1.146.1 0.0.0.0 area 1
>
>
> Rack1R1#sh ip route ospf
> 160.1.0.0/24 is subnetted, 1 subnets
> O N2 160.1.6.0 [110/20] via 155.1.146.6, 01:04:19, FastEthernet0/0
> 150.1.0.0/16 is variably subnetted, 4 subnets, 2 masks
> O 150.1.6.6/32 [110/2] via 155.1.146.6, 01:04:19, FastEthernet0/0
> O 150.1.5.5/32 [110/65] via 155.1.0.5, 01:05:14, Serial1/0
> O 150.1.4.4/32 [110/2] via 155.1.146.4, 01:04:19, FastEthernet0/0
>
>
> >> "Note that the route to 160.1.6.0 shows as N2"
>
>
>
>
> Rack1R1#sh ip ospf database | b Type-7
> Type-7 AS External Link States (Area 1)
>
> Link ID ADV Router Age Seq# Checksum Tag
> 160.1.6.0 150.1.6.6 11 0x80000004 0x005C48 0
>
> Type-5 AS External Link States
>
> Link ID ADV Router Age Seq# Checksum Tag
> 160.1.6.0 150.1.100.100 2037 0x80000002 0x002AC9 0
>
>
> >> This shows that Router 1 is doing the translation and is
> originating the Type-5 LSA in the OSPF domain (except Stub and NSSA
> areas).
>
>
>
> On the other ABR (R4)
>
> Rack1R4#sh ip route ospf
> 160.1.0.0/24 is subnetted, 1 subnets
> O E2 160.1.6.0 [110/20] via 155.1.146.6, 01:09:32, Ethernet0/1
> 150.1.0.0/16 is variably subnetted, 4 subnets, 2 masks
> O 150.1.6.6/32 [110/11] via 155.1.146.6, 01:09:39, Ethernet0/1
> O 150.1.5.5/32 [110/65] via 155.1.0.5, 01:10:23, Serial1/0
> O 150.1.1.1/32 [110/11] via 155.1.146.1, 01:09:39, Ethernet0/1
>
>
>
> >> "Note that the route to 160.1.6.0 shows as E2"
>
>
> Rack1R4#sh ip ospf data | b Type-7
> Type-7 AS External Link States (Area 1)
>
> Link ID ADV Router Age Seq# Checksum Tag
> 160.1.6.0 150.1.6.6 197 0x80000004 0x005C48 0
>
> Type-5 AS External Link States
>
> Link ID ADV Router Age Seq# Checksum Tag
> 160.1.6.0 150.1.100.100 180 0x80000003 0x0028CA 0
>
>
>
> My questions are:
>
> 1) Why R1 is showing the route as N2 for 160.1.6.0?
> 2)isn't Type-5 preferred over Type-7?
>
> I would have expeceted to see R1 to have this route as E2 (i.e. similar to
> R4).
>
> Thanks,
> Joseph.
>
>
> On Nov 10, 2007 11:15 PM, Joseph Saad <joseph.samir.saad@gmail.com> wrote:
> > Hi Shiran,
> >
> > I am referring to IE technology Lab "NSSA Area type 7to5 LSA
> > Translator Election".
> >
> > Regarding your Answer:
> >
> > When you use a NSSA not so stubby area then the ASBR will generate N2
> > for external into the area.
> >
> > >> "I am OK with that"
> >
> > E2 is for external routes and will be generated by ASBR.
> >
> > >> "I am OK with that for Normal Areas".
> >
> > in a router that have under his process an Area type NSSA will convert
> > the Type 7 LSA to Type 5 when going from NSSA to the Backbone Area.
> >
> > >> "True, but what if we have multiple ABR such as this particular
> > technology lab".
> >
> > there are no election for ABR or ASBR, if your router have under his
> > process more then one area then he is ABR, if he have redistribution
> > (or originating a default route) then he is ASBR.
> >
> > >> "True, but if you have multiple ABR's for the NSSA, one of them
> > (i.e. with the highest router-id) is elected for translating the type
> > 7 into type 5 LSA".
> >
> > Joseph.
> >
> >
> >
> >
> > On Nov 10, 2007 11:00 PM, shiran guez < shiranp3@gmail.com> wrote:
> > > when you use a NSSA not so stubby area then the ASBR will generate N2
> for
> > > external into the area.
> > >
> > > E2 is for external routes and will be generated by ASBR.
> > >
> > > in a router that have under his process an Area type NSSA will convert
> the
> > > Type 7 LSA to Type 5 when going from NSSA to the Backbone Area.
> > >
> > > there are no election for ABR or ASBR, if your router have under his
> process
> > > more then one area then he is ABR, if he have redistribution (or
> originating
> > > a default route) then he is ASBR.
> > >
> > >
> > >
> > >
> > >
> > > On Nov 10, 2007 8:45 PM, Joseph Saad < joseph.samir.saad@gmail.com>
> wrote:
> > >
> > > >
> > > >
> > > >
> > > > When I have 2 ABR's for an NSSA. The elected Type 7 to Type 5 LSA
> > > > translator shows the route in the routing table as N2 while the
> other
> > > > ABR shows it as E2 route.
> > > >
> > > > I can understand why the non-elected ABR shows the route as E2
> > > > (because it receives both type 7 LSA and type 5 LSA and type 5 LSA
> > > > will be preferred).
> > > >
> > > > What I can't understand is why the elected router shows the route as
>
> > > > N2 though it is the one which originated the type 5 LSA and already
> > > > has the type 7 LSA in its database.
> > > >
> > > > Can someone shed some light on why such behavior?
> > > >
> > > >
> _______________________________________________________________________
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > > >
> > >
> > >
> > >
> > > --
> > > Shiran Guez
> > > MCSE CCNP NCE1
> > > http://cciep3.blogspot.com
> > > http://www.linkedin.com/in/cciep3
> >
>
-- Shiran Guez MCSE CCNP NCE1 http://cciep3.blogspot.com http://www.linkedin.com/in/cciep3
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:29 ART