From: Muhammad Saleem (msaleems@gmail.com)
Date: Sat Nov 10 2007 - 13:59:41 ART
Cable side does matter, I am trying to configure clock rate on the interface
(DB60) of 2514 and Smart Serial of 2610XM routers where I am connecting DTE
site of the cable but both interfaces go down whenever I assign clock rate
but if I assign clock rate to the interface of a router where I am
connecting DCE side of the cable it works fine.
I know this might be very simple thing but I don't know how to make an
interface behaving like DCE while I am connecting DTE side of a cable to
that interface.
This is what I am trying to do
I have a router connecting to two frame-relay switches, coz of the WIC2T
with smart serial DCE end of the cable I can use these two interfaces only
as a DCE type but at the same time frame-relay switch has DCE interface too.
I see one option to buy a cable which has one end smart serial as DTE and
DB60 as DCE type.
Any other way to solve this issue while using existing cables?
Appreciate all responses
saleem
-----Original Message-----
From: David Prall [mailto:dcp@dcptech.com]
Sent: Saturday, November 10, 2007 12:48 AM
To: 'Scott Morris'; 'Muhammad Saleem'; ccielab@groupstudy.com
Subject: RE: How to use WIC2T with opposite type of connectors in
Frame-relay environment?
What does it matter which end is dce or dte. The dce end provides clock. But
either end can act as the frame-relay dce side. One is L1 signalling, and
the other is L2 signalling. They don't have to be one in the same. Use the
cables you have and be happy.
David
-- http://dcp.dcptech.com> -----Original Message----- > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On > Behalf Of Scott Morris > Sent: Friday, November 09, 2007 3:53 PM > To: 'Muhammad Saleem'; ccielab@groupstudy.com > Subject: RE: How to use WIC2T with opposite type of > connectors in Frame-relay environment? > > Go to their web site and purchase the one with the DCE end on > the other > side. :) > > Scott > > -----Original Message----- > From: Muhammad Saleem [mailto:msaleems@gmail.com] > Sent: Friday, November 09, 2007 1:38 PM > To: ccielab@groupstudy.com > Cc: smorris@ipexpert.com > Subject: RE: How to use WIC2T with opposite type of connectors in > Frame-relay environment? > > > I already have Smart Serial DCE Interface to DB60 DTE > interface Crossover > Cable; point is, how I can use that cable. > I want to use the WIC2T interface of router as DTE interface > but the cable > side that can go into WIC2T is DCE. > > saleem > > -----Original Message----- > From: Scott Morris [mailto:smorris@ipexpert.com] > Sent: Friday, November 09, 2007 8:54 PM > To: 'Muhammad Saleem'; ccielab@groupstudy.com > Subject: RE: How to use WIC2T with opposite type of connectors in > Frame-relay environment? > > Companies make some SS-DB60 cables exactly for that in a lab > environment. > Otherwise, if you have the "real" cables that terminate in > v.35 connectors > they will fit together just fine! > > http://www.anthonypanda.com/product.php?prd_id=9&opt_id=29 > > HTH > > > > Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) > #4713, JNCIE-M > #153, JNCIS-ER, CISSP, et al. > CCSI/JNCI-M/JNCI-ER > VP - Technical Training - IPexpert, Inc. > IPexpert Sr. Technical Instructor > > A Cisco Learning Partner - We Accept Learning Credits! > > smorris@ipexpert.com > > Telephone: +1.810.326.1444 > Fax: +1.810.454.0130 > http://www.ipexpert.com > > > > > > -----Original Message----- > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On > Behalf Of > Muhammad Saleem > Sent: Friday, November 09, 2007 12:33 PM > To: ccielab@groupstudy.com > Subject: How to use WIC2T with opposite type of connectors in > Frame-relay > environment? > > Dear Expert, > > I have Cisco 2610XM router with one WIC2T and one WIC1T, from > WIC2T both > interfaces are HD Smart Serial, and two cables with HD Smart Serial > connector End (DCE) that can only go to that router and other > End of these > cables have DB60 connector (DTE) that can only go to > frame-relay switches. > > How can I use these cables with frame-relay switch while cables have > opposite type of connectors? > > > > saleem > > ______________________________________________________________ > _________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html > > ______________________________________________________________ > _________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:29 ART