From: Joseph Brunner (joe@affirmedsystems.com)
Date: Sat Nov 10 2007 - 13:42:40 ART
The answer is
access-list 1 permit 150.16.0.0 0.0.253.255
access-list 1 permit 150.16.0.0 0.0.247.255
access-list 1 permit 150.16.11.0 0.0.0.255
access-list 1 permit 150.16.26.0 0.0.229.255
access-list 1 permit 150.16.42.0 0.0.213.255
access-list 1 permit 150.16.74.0 0.0.181.255
access-list 1 permit 150.16.138.0 0.0.117.255
access-list 1 permit 10.10.0.0 0.0.255.255
You want 1 FEWER lines... this is (8)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Wilson, Ryan # Atlanta
Sent: Saturday, November 10, 2007 11:23 AM
To: Scott Morris; Bertalan Dergez (bedergez); Cisco certification
Subject: RE: ACL-min lines
I'm thinking this would take a minute or two using binary. Is there a
trick behind it to speed things up?
Ryan
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Scott Morris
Sent: Saturday, November 10, 2007 10:44 AM
To: 'Bertalan Dergez (bedergez)'; 'Cisco certification'
Subject: RE: ACL-min lines
That's no fun if you actually allow that subnet to be denied. :)
But yes, the wonders of binary at work!
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Bertalan Dergez (bedergez)
Sent: Saturday, November 10, 2007 10:26 AM
To: Cisco certification
Subject: RE: ACL-min lines
Hi,
access-list 1 permit 150.16.0.0 0.0.7.255
access-list 1 permit 150.16.8.0 0.0.1.255
access-list 1 permit 150.16.11.0 0.0.0.255
access-list 1 permit 150.16.12.0 0.0.3.255
access-list 1 permit 150.16.16.0 0.0.15.255
access-list 1 permit 150.16.32.0 0.0.31.255
access-list 1 permit 150.16.64.0 0.0.63.255
access-list 1 permit 150.16.128.0 0.0.127.255
access-list 1 permit 10.10.0.0 0.0.255.255
Bertalan Dergez
Systems Engineer
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Scott Morris
Sent: 2007. november 10. 16:16
To: 'CJ'; 'Cisco certification'
Subject: RE: ACL-min lines
acl 10 permit 150.16.0.0 0.0.255.255
acl 10 permit 10.10.0.0 0.0.255.255
:)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
CJ
Sent: Saturday, November 10, 2007 2:57 AM
To: Cisco certification
Subject: ACL-min lines
Dear group
By only using permit statements what would be the best way to do the
following in as minimum acl entries as possible,
- deny 150.16.10.0/24
- permit 150.16.0.0/16
- permit 10.10.0.0/16
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:29 ART