From: Joseph Brunner (joe@affirmedsystems.com)
Date: Fri Nov 09 2007 - 02:33:28 ART
You can do a debug ip pim in production, it wont kill anything (I do it all
the time)
Post those results...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Anthony Bonilla
Sent: Friday, November 09, 2007 12:21 AM
To: ccielab@groupstudy.com
Subject: "show ip pim rp mapping" takes too long to display output...
Hi Group,
I have been facing an issue in displaying the output of "sh ip pim rp
mapping" in our production envirionment. We are cuurently using static RP
but allow an external RP for one of the partners that is learned via Auto
RP. We have configured static RP with override keyword to ensure that auto
RP is not preferred over static but when I issue that rp mapping command, I
have noticed a delay of about 30-45 minute before router stopped displaying
this information (I am talking about 65k with sup720s). Can someone pls let
me know if you have come across this issue and/or know what the problem
could be? TIA.
Tony
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:29 ART