From: Tarun Pahuja (pahujat@gmail.com)
Date: Wed Nov 07 2007 - 15:29:27 ART
Chris,
1) Can you see all routes on all routers? Do you have end to end
connectivity?
2) You have two mapping agents in the scenario, can you see local mappings
on each of them and on the adjoining routers? How about across the frame
cloud?
3) Clear mroute table on all routers.
You should be good to go!
Tarun
On 11/7/07, Chris Riling <criling@gmail.com> wrote:
>
> I fixed the RIP issue, that was my bad, but it souldn't have / didn't seem
> to have any effect on what's going on here anyway... the "debug ip mpacket
> detail" doesn't seem to say much either... I did it from the router that's a
> member of 224.8.8.8 - in the config above it was R4, but I moved it to R3
> just in case there was some oddity with the RP configuration, I wanted to
> see what would happen if a totally separate router was a member, not a
> router that is also an RP...
>
> *Jul 16 03:31:19.088: IP(0): MAC sa=000b.fd0c.cf80 (FastEthernet0/0), IP
> last-hop=131.1.34.4
> *Jul 16 03:31:19.088: IP(0): IP tos=0xC0, len=54, id=4038, ttl=3, prot=17
> *Jul 16 03:31: 19.088: IP(0): s=131.1.14.1 (FastEthernet0/0) d=224.0.1.40(Serial0/0.32) id=4038, ttl=3, prot=17, len=54(54), mforward
> *Jul 16 03:31:19.918: IP(0): MAC sa= 000b.fd0c.cf80 (FastEthernet0/0), IP
> last-hop=131.1.34.4
> *Jul 16 03:31:19.918: IP(0): IP tos=0xC0, len=54, id=3931, ttl=4, prot=17
> *Jul 16 03:31:19.918: IP(0): s= 131.1.34.4 (FastEthernet0/0) d=224.0.1.40(Serial0/0.32) id=3931, ttl=4, prot=17, len=54(54), mforward
>
> Thanks,
> Chris
>
>
>
>
> On 11/7/07, Tarun Pahuja <pahujat@gmail.com> wrote:
> >
> > Chris,
> > Please include 131.2.0.0 network under rip on router number 2.
> > For PIM to work you want to make sure that the underlying protocol is
> > functioning properly and you have proper routers in your routing table. PIM
> > using underlying IGP to calculate RPF.
> >
> > HTH,
> > Tarun
> >
> >
> > On 11/7/07, Joseph Brunner < joe@affirmedsystems.com> wrote:
> > >
> > > Debug ip mpacket detail
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > > Of
> > > Chris Riling
> > > Sent: Wednesday, November 07, 2007 10:44 AM
> > > To: Tarun Pahuja
> > > Cc: groupstudy
> > > Subject: Re: Soup-to-Nuts: MCAST Lab 5 - Auto RP with Multiple RP's
> > >
> > > BTW - R4 IS receiving announcements from R1:
> > >
> > > *Mar 3 03:24:23.515: Auto-RP(0): Received RP-announce, from 1.1.1.1,
> > > RP_cnt
> > > 1, ht 31
> > > *Mar 3 03:24:23.515: Auto-RP(0): Received RP-announce, from 1.1.1.1,
> > > RP_cnt
> > > 1, ht 31
> > >
> > >
> > > but I still don't see an entry for 224.8.8.8:
> > >
> > > R4#sh ip pim rp
> > > Group: 224.11.11.11 , RP: 4.4.4.4, v2, v1, next RP-reachable in
> > > 00:01:19
> > >
> > >
> > > Thanks,
> > > Chris
> > >
> > >
> > > On 11/7/07, Chris Riling < criling@gmail.com> wrote:
> > > >
> > > > I just labbed it up again after a night of sleep and I'm still
> > > seeing the
> > > > same thing...
> > > >
> > > >
> > > > Topology:
> > > >
> > > > R1
> > > > R2
> > > > |
> > > > |
> > > > |
> > > > |
> > > > Frame 131.1.14.0/24
> > > Frame
> > > > 131.1.23.0/24
> > > > |
> > > > |
> > > > |
> > > > |
> > > > R4--------------------------Ethernet
> > > > 131.1.34.0/24-----------------------------R3
> > > >
> > > > Configs:
> > > >
> > > > R1:
> > > >
> > > > !
> > > > version 12.4
> > > > service timestamps debug datetime msec
> > > > service timestamps log datetime msec
> > > > no service password-encryption
> > > > !
> > > > hostname R1
> > > > !
> > > > boot-start-marker
> > > > boot-end-marker
> > > > !
> > > > !
> > > > !
> > > > resource policy
> > > > !
> > > > no aaa new-model
> > > > no network-clock-participate slot 1
> > > > no network-clock-participate wic 0
> > > > ip subnet-zero
> > > > !
> > > > !
> > > > !
> > > > !
> > > > ip cef
> > > > ip multicast-routing
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > interface Loopback0
> > > > ip address 1.1.1.1 255.0.0.0
> > > > ip pim sparse-dense-mode
> > > > !
> > > > interface FastEthernet0/0
> > > > ip address 131.1.1.1 255.255.255.0
> > > > ip pim sparse-dense-mode
> > > > ip igmp join-group 224.11.11.11
> > > > duplex auto
> > > > speed auto
> > > > !
> > > > interface Serial0/0
> > > > no ip address
> > > > encapsulation frame-relay
> > > > no frame-relay inverse-arp
> > > > !
> > > > interface Serial0/0.14 point-to-point
> > > > ip address 131.1.14.1 255.255.255.0
> > > > ip pim sparse-dense-mode
> > > > frame-relay interface-dlci 104
> > > > !
> > > > interface Serial0/1
> > > > no ip address
> > > > shutdown
> > > > !
> > > > router rip
> > > > version 2
> > > > network 1.0.0.0
> > > > network 131.1.0.0
> > > > no auto-summary
> > > > !
> > > > ip classless
> > > > !
> > > > !
> > > > ip http server
> > > > no ip http secure-server
> > > > ip pim send-rp-announce Loopback0 scope 5 group-list 1 interval 10
> > > > ip pim send-rp-discovery scope 5
> > > > !
> > > > access-list 1 permit 224.8.8.8
> > > > !
> > > > !
> > > > !
> > > > control-plane
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > alias exec sir sh ip route
> > > > alias exec sib sh ip bgp
> > > > alias exec cir clear ip route *
> > > > alias exec siib sh ip int brief | e unass
> > > > !
> > > > line con 0
> > > > logging synchronous
> > > > line aux 0
> > > > line vty 0 4
> > > > login
> > > > !
> > > > !
> > > > end
> > > >
> > > > R2:
> > > >
> > > > !
> > > > version 12.4
> > > > service timestamps debug datetime msec
> > > > service timestamps log datetime msec
> > > > no service password-encryption
> > > > !
> > > > hostname R2
> > > > !
> > > > boot-start-marker
> > > > boot-end-marker
> > > > !
> > > > !
> > > > !
> > > > resource policy
> > > > !
> > > > no aaa new-model
> > > > no network-clock-participate slot 1
> > > > no network-clock-participate wic 0
> > > > ip subnet-zero
> > > > !
> > > > !
> > > > !
> > > > !
> > > > ip cef
> > > > ip multicast-routing
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > interface FastEthernet0/0
> > > > ip address 131.2.2.2 255.255.255.0
> > > > ip pim sparse-dense-mode
> > > > duplex auto
> > > > speed auto
> > > > !
> > > > interface Serial0/0
> > > > no ip address
> > > > encapsulation frame-relay
> > > > no frame-relay inverse-arp
> > > > !
> > > > interface Serial0/0.23 point-to-point
> > > > ip address 131.1.23.2 255.255.255.0
> > > > ip pim sparse-dense-mode
> > > > frame-relay interface-dlci 203
> > > > !
> > > > interface Serial0/1
> > > > no ip address
> > > > shutdown
> > > > !
> > > > router rip
> > > > version 2
> > > > network 131.1.0.0
> > > > no auto-summary
> > > > !
> > > > ip classless
> > > > !
> > > > !
> > > > ip http server
> > > > no ip http secure-server
> > > > !
> > > > !
> > > > !
> > > > !
> > > > control-plane
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > alias exec sir sh ip route
> > > > alias exec sib sh ip bgp
> > > > alias exec cir clear ip route *
> > > > alias exec siib sh ip int brief | e unass
> > > > !
> > > > line con 0
> > > > logging synchronous
> > > > line aux 0
> > > > line vty 0 4
> > > > login
> > > > !
> > > > !
> > > > end
> > > >
> > > > R3:
> > > >
> > > > !
> > > > version 12.4
> > > > service timestamps debug datetime msec
> > > > service timestamps log datetime msec
> > > > no service password-encryption
> > > > !
> > > > hostname R3
> > > > !
> > > > boot-start-marker
> > > > boot-end-marker
> > > > !
> > > > !
> > > > !
> > > > resource policy
> > > > !
> > > > no aaa new-model
> > > > no network-clock-participate slot 1
> > > > no network-clock-participate wic 0
> > > > !
> > > > !
> > > > !
> > > > !
> > > > ip cef
> > > > ip multicast-routing
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > interface FastEthernet0/0
> > > > ip address 131.1.34.3 255.255.255.0
> > > > ip pim sparse-dense-mode
> > > > duplex auto
> > > > speed auto
> > > > !
> > > > interface Serial0/0
> > > > no ip address
> > > > encapsulation frame-relay
> > > > no dce-terminal-timing-enable
> > > > no frame-relay inverse-arp
> > > > frame-relay lmi-type ansi
> > > > !
> > > > interface Serial0/0.32 point-to-point
> > > > ip address 131.1.23.3 255.255.255.0
> > > > ip pim sparse-dense-mode
> > > > frame-relay interface-dlci 302
> > > > !
> > > > interface Serial0/1
> > > > no ip address
> > > > shutdown
> > > > no dce-terminal-timing-enable
> > > > !
> > > > router rip
> > > > version 2
> > > > network 131.1.0.0
> > > > no auto-summary
> > > > !
> > > > !
> > > > !
> > > > ip http server
> > > > no ip http secure-server
> > > > !
> > > > !
> > > > !
> > > > !
> > > > control-plane
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > alias exec sir sh ip route
> > > > alias exec sib sh ip bgp
> > > > alias exec cir clear ip route *
> > > > alias exec siib sh ip int brief | e unass
> > > > !
> > > > line con 0
> > > > logging synchronous
> > > > line aux 0
> > > > line vty 0 4
> > > > login
> > > > !
> > > > !
> > > > end
> > > >
> > > >
> > > > R4:
> > > >
> > > > !
> > > > version 12.4
> > > > service timestamps debug datetime msec
> > > > service timestamps log datetime msec
> > > > no service password-encryption
> > > > !
> > > > hostname R4
> > > > !
> > > > boot-start-marker
> > > > boot-end-marker
> > > > !
> > > > !
> > > > !
> > > > resource policy
> > > > !
> > > > no aaa new-model
> > > > no network-clock-participate slot 1
> > > > no network-clock-participate wic 0
> > > > ip subnet-zero
> > > > !
> > > > !
> > > > !
> > > > !
> > > > ip cef
> > > > ip multicast-routing
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > interface Loopback0
> > > > ip address 4.4.4.4 255.0.0.0
> > > > ip pim sparse-dense-mode
> > > > !
> > > > interface FastEthernet0/0
> > > > ip address 131.1.34.4 255.255.255.0
> > > > ip pim sparse-dense-mode
> > > > ip igmp join-group 224.8.8.8
> > > > duplex auto
> > > > speed auto
> > > > !
> > > > interface Serial0/0
> > > > no ip address
> > > > encapsulation frame-relay
> > > > no frame-relay inverse-arp
> > > > frame-relay lmi-type ansi
> > > > !
> > > > interface Serial0/0.41 point-to-point
> > > > ip address 131.1.14.4 255.255.255.0
> > > > ip pim sparse-dense-mode
> > > > frame-relay interface-dlci 401
> > > > !
> > > > interface Serial0/1
> > > > no ip address
> > > > shutdown
> > > > !
> > > > router rip
> > > > version 2
> > > > network 4.0.0.0
> > > > network 131.1.0.0
> > > > no auto-summary
> > > > !
> > > > ip classless
> > > > !
> > > > !
> > > > ip http server
> > > > no ip http secure-server
> > > > ip pim send-rp-announce Loopback0 scope 5 group-list 1 interval 10
> > > > ip pim send-rp-discovery scope 5
> > > > !
> > > > access-list 1 deny 224.8.8.8
> > > > access-list 1 permit 224.0.0.0 15.255.255.255
> > > > !
> > > > !
> > > > !
> > > > control-plane
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > alias exec sir sh ip route
> > > > alias exec sib sh ip bgp
> > > > alias exec cir clear ip route *
> > > > alias exec siib sh ip int brief | e unass
> > > > !
> > > > line con 0
> > > > logging synchronous
> > > > line aux 0
> > > > line vty 0 4
> > > > login
> > > > !
> > > > !
> > > > end
> > > >
> > > >
> > > > Thanks,
> > > > Chris
> > > >
> > > >
> > > > On 11/7/07, Tarun Pahuja < pahujat@gmail.com> wrote:
> > > > >
> > > > > Chris,
> > > > > Sure post the config, 30 seconds response time might be
> > > > > difficult since we are in totally different time zone. I promise a
> > >
> > > Timely
> > > > > response.
> > > > > Thanks,
> > > > > Tarun
> > > > >
> > > > >
> > > > > On 11/7/07, Chris Riling < criling@gmail.com> wrote:
> > > > >
> > > > > > Hey Guys,
> > > > > >
> > > > > > I got the topology working okay, and I joined each of the
> > > groups
> > > > > > on 1
> > > > > > router using "ip igmp join-group" and when I ping the group
> > > addresses
> > > > > > and do
> > > > > > a "sh ip pim rp" on another router, the RP for one of the groups
> > > shows
> > > > > > up,
> > > > > > but not the other... anyone seen this happen? If it's not
> > > something
> > > > > > you can
> > > > > > can answer in like 30 seconds I can post the config :)
> > > > > >
> > > > > > Thanks,
> > > > > > Chris
> > > > > >
> > > > > >
> > > > > >
> > >
> > > _______________________________________________________________________
> > > > > > Subscription information may be found at:
> > > > > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:28 ART