From: Joseph Brunner (joe@affirmedsystems.com)
Date: Wed Nov 07 2007 - 13:51:32 ART
I hope you pass on your first attempt also!
But the 3600 with a switch module will NOT prepare you for the switching
tasks you will face. That I can assure you.
Nor will it prepare you for the complexity of handling a large rack in 240
minutes (about all you have until you must proceed carefully to qos, mcast,
and security which are also more points than you can punt.
I just want to let everyone one know, they need to be ready for the
intricacies of the 3550/3560 in depth.
-Joe
-----Original Message-----
From: Scott Vermillion [mailto:scott_ccie_list@it-ag.com]
Sent: Wednesday, November 07, 2007 11:47 AM
To: 'Patrick J Greene'; 'Joseph Brunner'; ccielab@groupstudy.com
Subject: RE: Dynamips Question
Of course the other option many of us go for is to integrate physical
switches with the Dynamips environment. Like I've said before Joe, if your
friendly rack rental outfit swapped physical routers and a Dynamips server
(much like switching someone's normal coffee with Folger's Crystals (for
those of you around and coherent here in the States in the '70s)), how would
you even know the difference? Hint: you wouldn't.
Perhaps for a better understanding that I can offer, ask Con Spathas. He's
the guy who just posted here about his pass on a *first attempt* in Brussels
after preparing with a *Dynamips lab*...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Patrick J Greene
Sent: Wednesday, November 07, 2007 7:47 AM
To: Joseph Brunner; ccielab@groupstudy.com
Subject: RE: Dynamips Question
Joseph,
Switching is accomplished with a 16-port switch module in the 3600 router.
You still have all of the trunking, channeling, and other switching fun you
can handle.
I am painfully aware of how many points of switching there are.
Thanks,
Patrick
-----Original Message-----
From: Joseph Brunner [mailto:joe@affirmedsystems.com]
Sent: Wednesday, November 07, 2007 9:40 AM
To: Patrick J Greene; ccielab@groupstudy.com
Subject: RE: Dynamips Question
I don't understand this...
How can you study with only routers on a Routing & SWITCHING test...
And believe me when you find out how many points of switching there are, you
may choke
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Patrick J Greene
Sent: Wednesday, November 07, 2007 8:50 AM
To: ccielab@groupstudy.com
Subject: OT: Dynamips Question
I have a laptop with a 1.7Ghz Centrino and 2GB of RAM running bare bones XP.
I was able to bring up the entire IE Lab (14 devices) on 2 Dynamips
instances but obviously it runs like molasses going uphill in January. The
CPU stays pegged at 100% and there is still about 125MB of RAM free. I can
run a browser and wordpad on the laptop without much pain, but when I telnet
to the routers (from another laptop) it is unusable. I do connect but just
painfully slow.
Any performance tuning ideas? I would like to keep the environment on the
laptop because as a consultant I travel a lot. It's nice to have your lab
portable.
Thanks for the advice.
Patrick
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:28 ART