From: Chris Riling (criling@gmail.com)
Date: Wed Nov 07 2007 - 13:40:38 ART
R1#sh ip pim rp mapping
PIM Group-to-RP Mappings
This system is an RP (Auto-RP)
This system is an RP-mapping agent
Group(s) 224.0.0.0/4
RP 4.4.4.4 (?), v2v1
Info source: 4.4.4.4 (?), elected via Auto-RP
Uptime: 00:00:03, expires: 00:00:27
Group(s) (-)224.8.8.8/32
RP 4.4.4.4 (?), v2v1
Info source: 4.4.4.4 (?), elected via Auto-RP
Uptime: 00:00:03, expires: 00:00:27
RP 1.1.1.1 (?), v2v1
Info source: 1.1.1.1 (?), via Auto-RP
Uptime: 00:09:56, expires: 00:00:23
R1#
R4#sh ip pim rp mapping
PIM Group-to-RP Mappings
This system is an RP (Auto-RP)
This system is an RP-mapping agent
Group(s) 224.0.0.0/4
RP 4.4.4.4 (?), v2v1
Info source: 4.4.4.4 (?), elected via Auto-RP
Uptime: 00:08:47, expires: 00:00:23
Group(s) (-)224.8.8.8/32
RP 4.4.4.4 (?), v2v1
Info source: 4.4.4.4 (?), elected via Auto-RP
Uptime: 00:08:47, expires: 00:00:23
R4#
Thanks,
Chris
On 11/7/07, Eric Leung <eric.lwc@gmail.com> wrote:
>
> can you show the "show ip pim rp mapping" on R1 - 4?
>
> 2007/11/7, Chris Riling <criling@gmail.com>:
> >
> > Hey Guys,
> >
> > I got the topology working okay, and I joined each of the groups
> > on 1
> > router using "ip igmp join-group" and when I ping the group addresses
> > and do
> > a "sh ip pim rp" on another router, the RP for one of the groups shows
> > up,
> > but not the other... anyone seen this happen? If it's not something you
> > can
> > can answer in like 30 seconds I can post the config :)
> >
> > Thanks,
> > Chris
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:28 ART