From: Tarun Pahuja (pahujat@gmail.com)
Date: Wed Nov 07 2007 - 06:44:21 ART
If any of the *ip dhcp client* commands are entered after an IP address has
been acquired from DHCP, it will not take effect until the next time the
router acquires an IP address from DHCP.
HTH,
Tarun
On 11/7/07, athaided@hotmail.com <athaided@hotmail.com> wrote:
>
> hi
> R2 is successfully pulling dhcp from R1
>
> R2 Client
> interface FastEthernet0/0
> ip dhcp client client-id FastEthernet0/0
> ip dhcp client hostname R2
> ip dhcp client lease 0 0 5
> ip address dhcp
> duplex auto
> speed auto
>
> R1 Server
> ip dhcp pool R1
> host 1.1.1.2 255.255.255.0
> client-identifier 0100.1c58.b9fe.e0
> domain-name www.cisco.com
> lease 0 0 4
>
> However when i do a show ip dhcp binding command why does the Lease
> expiration mention infinie. Shouldn't it say 5 minutes.
> Thanks
> R1#sho ip dhcp binding
> Bindings from all pools not associated with VRF:
> IP address Client-ID/ Lease expiration Type
> Hardware address/
> User name
> 1.1.1.2 0100.1c58.b9fe.e0 Infinite Manual
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:28 ART