From: Alex Steer (alex.steer@eison.co.uk)
Date: Mon Nov 05 2007 - 15:41:22 ART
Yeh, It give me an error when I try to configure a virtual-link over area47.
The lab said you cannot make new IP addresses. How can you configure a gre
tunnel?
________________________________
From: M e [mailto:iosluver@gmail.com]
Sent: Mon 11/5/2007 6:29 PM
To: Alex Steer
Subject: Re: ospf virtual-link over totally stubby area
Ajay just hi the nail on the head. Stub areas don't support virtual-links so
the only other way to do this is to use a GRE tunnel.
On 11/5/07, Alex Steer <alex.steer@eison.co.uk> wrote:
Hi,
I got completely stuck on this question I hoped someone maybe able to help
me
out. The topology is as follows
AREA 0=Router4====area 47=====Switch1=area0
The question was (word for word):-
Configure OSPF area 47 on the Ethernet segment between R4 and SW1
Devices in OSPF area 47 should only receive LSA of type 1, 2 and a default
of
type 3.
To me that says configure Router 4 with "area 47 stub no-summary"
The problem then is that I cant configure a virtual-link to SW1s area0.
Is the answer on router4:-
configure area47 as normal area
configure "default-information orginate always" on router4
configure "area 47 filter-list prefix prefix-list"
ip prefix-list prefix-list permit 0.0.0.0/0 le 32
Can anybody suggest for sure?
Many thanks
Alex
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:28 ART