From: jatinder.p.singh@bt.com
Date: Mon Nov 05 2007 - 06:50:19 ART
Mark,
Keep your Tone down here. If I have spend $10000 on your products and
ask some simple questions which are missing from your solutions gude
than where is my mistake. You are asking me that I will go back and take
the training of CCVP but you people have top make your workbook perfect
not provide any baseless comment to me.
I have not seen any where in your solution workbook that has mentioned
you have to create a Route Pattern. I have not created any Route Pattern
yet on CCM. You have to clearly mentioned that in solution work book
also. In your Proctor Guide Pages 82 till 87 where you have mentioned
that to make it work you have to create a route Pattern. I know that
there is no Route Pattern for 3... numbers. But I have to follow as per
your work book solution and thinking that I am doing something wrong
here.
Now you people ask me that you dont have base knowlege. Why we will buy
your workbooks and support from you guys because we are not expert as
you are.
I dont know what I have ask you that you people are telling that you
will remove me from Group list of voice. If you think that you people
are only expert in World than you are wrong. There are so many people
who can answer my questions. If you dont want to answer. I dont have any
probs. But I will continue with my studies.
Regards
J P Singh
________________________________
From: nobody@groupstudy.com on behalf of Mark Snow
Sent: Sun 04/11/2007 20:27
To: Irfan Siddiqui
Cc: Cisco certification
Subject: Re: IPEXPERT VOICE LAB technology LAB 4 (4.9) - please help....
JP,
I certainly understand your frustration in getting this solution to
work, the CUBE can be a tricky thing to get working at times even
without adding H323 GK and transcoding to the mix.
After having seen your posts related to this very issue today over on
OSL_Voice, where Vik and I have been supporting you and this WB for
some time, it seems that you have a basic CSS/PT or possibly ICT or
H323 GW issue before the call ever gets over to the CUBE - seeing as
how you are not seeing any debug output whatsoever on the HQ CUBE even
when doing a 'debug voip dialpeer all'. I would start there looking at
the HQ phone that is placing the call - look at the CSS's on the
device and the line level, follow that CSS and look at the PT's inside
of it, then look at the Route Patterns in that PT that may match, and
finally follow those onto the RL, RG, and then ICT Trunk or H323 GW
and check to see that the call is leaving the GW and headed to the
proper address.
You should probably try activating CCM Detailed Traces for both the
Pub and the Sub, and it would help if the GW/ICT and the HQ Phone were
both registered to the same Primary CPE (Pub OR Sub) so that the
traces can either all be found on one FS, or at least that the time is
sync'd between them so you can sync up the trace file times.
JP, I feel I would be remiss if I didn't remind you how many hours my
team has spent with you on the phone, let alone the many more hours
through email and forum support, trying to troubleshoot some of the
more basic configs of our WB where you also made the countless claims
that our WB was prone to these types of errors - and that just as in
this situation, the problem showed itself to be one of user
configuration error and proved that the configurations were in fact
correct. I am not claiming that we have never once encountered an
error in our Voice WB, of course we are all human and do have the
occasional error. All I ask is that before you make baseless claims
such as this one, that you seek support and allow us the chance to
give you the requested help so that we may help you find your errors
as you go along and continue to aid you on your journey to becoming an
IE in Voice.
Once you work through the suggestions I gave in the second paragraph,
please let me know specifically what you find in relation to each
question along the way (please include the name of the CSS assigned to
the Line or Device, the names of the PT in the CSS, the RP, the RL,
the RG, the GW, and the IP address of the GW in question).
Good luck in your studies and hope to continue to help you on this
problem.
Kind Regards,
Mark Snow
CCIE #14073 (Voice, Security)
CCSI #31583
Senior Technical Instructor - IPexpert, Inc.
A Cisco Learning Partner - We Accept Learning Credits!
Telephone: +1.810.326.1444
Fax: +1.309.413.4097
Mailto: msnow@ipexpert.com
On Nov 4, 2007, at 4:37 AM, Irfan Siddiqui wrote:
> Hi
>
> I tried the debug but im not getting any output from it. I cant even
> make calls to generate any messages. From HQ I get message "call
> cannot
> be completed as dialed" and from branch2 I get busy tone.
>
> Here is the question, my config is below in the email trail...
>
> Configure the HQ-RTR as an IPIPGW. Calls will be coming into it from
> CCM
> via H323 using G711ulaw and then be routed out to the BR2 CME via SIP
> using G729. Calls will also be coming from CME via H323 using G729 and
> routed to CCM via SIP using G711ualaw . Also ensure when calls are
> coming from SIP to H323 that RFC2833 is properly stripped. Ensure that
> if calls are coming from H323 to SIP, that RFC2833 is used for the SIP
> side.
>
> -----Original Message-----
> From: Tarun Pahuja [mailto:pahujat@gmail.com]
> Sent: 03 November 2007 19:44
> To: Irfan Siddiqui
> Cc: cisco@groupstudy.com; ccielab@groupstudy.com
> Subject: Re: IPEXPERT LAB technology LAB 4 (4.9)
>
> Irfan,
> Unfortunately I do not have the workbook. What I would
> suggest is that you troubleshoot and see if even the IPIP GW feature
> is being triggered or not. Many times I have noticed that students
> miss the prerequisites for IPIP GW or make some other minor mistake.
>
> Try issuing the following command and let me know what you find out.
>
> debug voip ipipgw
>
> HTH,
> Tarun
>
> On 11/3/07, Irfan Siddiqui <Irfan.Siddiqui@vanco.co.uk> wrote:
>> Hi All
>>
>>
>>
>> I am stuck on Ipexpert Lab Section 4 (4.9), Please can anyone help ??
>>
>>
>>
>> I have followed exactly as per workbook solution but my IPIP gw does
> not
>> work as I cant get the phones to ring between BR2 and HQ. The
>> workbook
>> does not explain what you should expect, how to troubleshoot if it
>> doesn't work, what you should observe if it does work.. more over I
> have
>> come across mistakes in the workbook in prior sections, so I have
>> stopped trusting the workbook solution..
>>
>>
>>
>> Here is my config, please can someon advise .. thanks in advance...
>>
>>
>>
>>
>>
>> HQ-RTR#sh runn
>>
>> Building configuration...
>>
>>
>>
>> Current configuration : 4051 bytes
>>
>> !
>>
>> ! Last configuration change at 22:39:13 edt Tue Oct 30 2007 by
>>
>> ! NVRAM config last updated at 22:39:14 edt Tue Oct 30 2007 by
>>
>> !
>>
>> version 12.4
>>
>> service timestamps debug datetime msec
>>
>> service timestamps log datetime msec
>>
>> no service password-encryption
>>
>> !
>>
>> hostname HQ-RTR
>>
>> !
>>
>> boot-start-marker
>>
>> boot-end-marker
>>
>> !
>>
>> card type t1 0 0
>>
>> logging buffered 51200 warnings
>>
>> enable secret 5 $1$iD.l$syg72B43FK6Yk4QGq2H5B/
>>
>> !
>>
>> no aaa new-model
>>
>> !
>>
>> resource policy
>>
>> !
>>
>> memory-size iomem 20
>>
>> clock timezone est -5
>>
>> clock summer-time edt recurring
>>
>> no network-clock-participate wic 0
>>
>> no network-clock-participate wic 2
>>
>> ip subnet-zero
>>
>> !
>>
>> !
>>
>> ip cef
>>
>> !
>>
>> !
>>
>> ip domain name yourdomain.com
>>
>> !
>>
>> !
>>
>> voice-card 0
>>
>> dspfarm
>>
>> dsp services dspfarm
>>
>> !
>>
>> !
>>
>> !
>>
>> voice service voip
>>
>> allow-connections h323 to h323
>>
>> allow-connections h323 to sip
>>
>> allow-connections sip to h323
>>
>> allow-connections sip to sip
>>
>> h323
>>
>> sip
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> username cisco privilege 15 secret 5 $1$s4bl$Lb.b/v/HgWKTdfP/h9
>>
>> !
>>
>> !
>>
>> controller T1 0/0/0
>>
>> framing esf
>>
>> linecode b8zs
>>
>> channel-group 0 timeslots 1-24
>>
>> !
>>
>> controller T1 0/0/1
>>
>> framing esf
>>
>> linecode b8zs
>>
>> !
>>
>> controller E1 0/2/0
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> interface Loopback0
>>
>> ip address 172.4.100.1 255.255.255.0
>>
>> ip ospf network point-to-point
>>
>> h323-gateway voip interface
>>
>> h323-gateway voip bind srcaddr 172.4.100.1
>>
>> !
>>
>> interface FastEthernet0/0
>>
>> no ip address
>>
>> no ip redirects
>>
>> no ip proxy-arp
>>
>> duplex auto
>>
>> speed auto
>>
>> !
>>
>> interface FastEthernet0/0.1
>>
>> encapsulation dot1Q 1 native
>>
>> ip address 10.4.0.254 255.255.255.0
>>
>> no ip redirects
>>
>> no ip proxy-arp
>>
>> no snmp trap link-status
>>
>> !
>>
>> interface FastEthernet0/0.3
>>
>> !
>>
>> interface FastEthernet0/0.140
>>
>> encapsulation dot1Q 140
>>
>> no snmp trap link-status
>>
>> !
>>
>> interface FastEthernet0/0.240
>>
>> encapsulation dot1Q 240
>>
>> ip address 10.4.200.3 255.255.255.0
>>
>> no ip redirects
>>
>> no ip proxy-arp
>>
>> no snmp trap link-status
>>
>> !
>>
>> interface FastEthernet0/1
>>
>> no ip address
>>
>> shutdown
>>
>> duplex auto
>>
>> speed auto
>>
>> !
>>
>> interface Serial0/0/0:0
>>
>> no ip address
>>
>> !
>>
>> interface Serial0/1/0
>>
>> no ip address
>>
>> encapsulation frame-relay IETF
>>
>> frame-relay lmi-type ansi
>>
>> !
>>
>> interface Serial0/1/0.1 point-to-point
>>
>> ip address 162.4.101.1 255.255.255.0
>>
>> ip ospf mtu-ignore
>>
>> frame-relay interface-dlci 201
>>
>> !
>>
>> interface Serial0/1/0.2 point-to-point
>>
>> ip address 162.4.102.1 255.255.255.0
>>
>> ip ospf mtu-ignore
>>
>> frame-relay interface-dlci 202
>>
>> !
>>
>> router ospf 1
>>
>> log-adjacency-changes
>>
>> network 10.4.200.0 0.0.0.255 area 0
>>
>> network 162.4.101.0 0.0.0.255 area 0
>>
>> network 162.4.102.0 0.0.0.255 area 0
>>
>> network 172.4.100.0 0.0.0.255 area 0
>>
>> !
>>
>> ip classless
>>
>> !
>>
>> !
>>
>> ip http server
>>
>> ip http access-class 23
>>
>> ip http authentication local
>>
>> no ip http secure-server
>>
>> ip http timeout-policy idle 60 life 86400 requests 10000
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> control-plane
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> sccp local FastEthernet0/0.240
>>
>> sccp ccm 172.4.100.1 identifier 1
>>
>> sccp ip precedence 3
>>
>> sccp
>>
>> !
>>
>> sccp ccm group 1
>>
>> associate ccm 1 priority 1
>>
>> associate profile 1 register xcoder
>>
>> !
>>
>> dspfarm profile 1 transcode
>>
>> codec g711ulaw
>>
>> codec g711alaw
>>
>> codec g729ar8
>>
>> codec g729abr8
>>
>> codec gsmfr
>>
>> codec g729br8
>>
>> maximum sessions 1
>>
>> associate application SCCP
>>
>> !
>>
>> !
>>
>> dial-peer voice 10 voip
>>
>> incoming called-number 3...
>>
>> dtmf-relay h245-alphanumeric
>>
>> codec g711ulaw
>>
>> !
>>
>> dial-peer voice 11 voip
>>
>> destination-pattern 3...
>>
>> session protocol sipv2
>>
>> session target ipv4:10.4.202.1
>>
>> dtmf-relay rtp-nte digit-drop h245-alphanumeric
>>
>> !
>>
>> dial-peer voice 20 voip
>>
>> incoming called-number [12]...
>>
>> dtmf-relay h245-alphanumeric
>>
>> !
>>
>> dial-peer voice 21 voip
>>
>> destination-pattern [12]...
>>
>> session protocol sipv2
>>
>> session target ipv4:10.4.200.21
>>
>> dtmf-relay rtp-nte
>>
>> codec g711ulaw
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> gatekeeper
>>
>> shutdown
>>
>> !
>>
>> !
>>
>> telephony-service
>>
>> max-ephones 10
>>
>> max-dn 10
>>
>> ip source-address 172.4.100.1 port 2000
>>
>> sdspfarm units 1
>>
>> sdspfarm transcode sessions 1
>>
>> sdspfarm tag 1 xcoder
>>
>> max-conferences 12 gain -6
>>
>> !
>>
>> !
>>
>> line con 0
>>
>> login local
>>
>> line aux 0
>>
>> line vty 0 4
>>
>> access-class 23 in
>>
>> exec-timeout 0 0
>>
>> privilege level 15
>>
>> no login
>>
>> transport input telnet
>>
>> line vty 5 15
>>
>> access-class 23 in
>>
>> privilege level 15
>>
>> no login
>>
>> transport input telnet
>>
>> !
>>
>> warm-reboot
>>
>> scheduler allocate 20000 1000
>>
>> ntp master
>>
>> !
>>
>> End
>>
>>
>>
>>
>>
>> BR2-RTR# sh runn
>>
>> Building configuration...
>>
>>
>>
>> Current configuration : 5754 bytes
>>
>> !
>>
>> ! Last configuration change at 22:38:58 edt Tue Oct 30 200
>>
>> ! NVRAM config last updated at 22:38:59 edt Tue Oct 30 200
>>
>> !
>>
>> version 12.4
>>
>> service timestamps debug datetime msec
>>
>> service timestamps log datetime msec
>>
>> no service password-encryption
>>
>> !
>>
>> hostname BR2-RTR
>>
>> !
>>
>> boot-start-marker
>>
>> boot-end-marker
>>
>> !
>>
>> card type e1 0 0
>>
>> ! card type command needed for slot/vwic-slot 0/3
>>
>> logging buffered 51200 warnings
>>
>> enable secret 5 $1$QV1t$IR5/yJLcfNWjDv7dBR3cC0
>>
>> !
>>
>> no aaa new-model
>>
>> !
>>
>> resource policy
>>
>> !
>>
>> clock timezone est -5
>>
>> clock summer-time edt recurring
>>
>> network-clock-participate wic 0
>>
>> ip subnet-zero
>>
>> !
>>
>> !
>>
>> ip cef
>>
>> no ip dhcp use vrf connected
>>
>> ip dhcp excluded-address 10.4.202.1 10.4.202.119
>>
>> ip dhcp excluded-address 10.4.202.130 10.4.202.254
>>
>> !
>>
>> ip dhcp pool br2
>>
>> network 10.4.202.0 255.255.255.0
>>
>> default-router 10.4.202.1
>>
>> option 150 ip 10.4.202.1
>>
>> !
>>
>> !
>>
>> no ip domain lookup
>>
>> ip host sip1.ipexpert.com 192.20.200.51
>>
>> ip host sip2.ipexpert.com 192.20.200.52
>>
>> !
>>
>> isdn switch-type primary-net5
>>
>> !
>>
>> voice-card 0
>>
>> dspfarm
>>
>> dsp services dspfarm
>>
>> !
>>
>> !
>>
>>
>>
>> !
>>
>> controller E1 0/0/0
>>
>> ds0-group 0 timeslots 1-3 type r2-digital r2-semi-compelled ani
>>
>> cas-custom 0
>>
>> dnis-digits min 3 max 11
>>
>> ani-digits min 1 max 65
>>
>> !
>>
>> controller E1 0/0/1
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> interface Loopback0
>>
>> ip address 172.4.102.1 255.255.255.255
>>
>> ip ospf network point-to-point
>>
>> !
>>
>> interface FastEthernet0/0
>>
>> description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE 0/0$
>>
>> no ip address
>>
>> duplex auto
>>
>> speed auto
>>
>> !
>>
>> interface FastEthernet0/0.140
>>
>> encapsulation dot1Q 140 native
>>
>> no snmp trap link-status
>>
>> !
>>
>> interface FastEthernet0/0.240
>>
>> encapsulation dot1Q 240
>>
>> ip address 10.4.202.1 255.255.255.0
>>
>> no snmp trap link-status
>>
>> !
>>
>> interface Service-Engine0/0
>>
>> no ip address
>>
>> shutdown
>>
>> !
>>
>> interface FastEthernet0/1
>>
>> no ip address
>>
>> shutdown
>>
>> duplex auto
>>
>> speed auto
>>
>> !
>>
>> interface Serial0/1/0
>>
>> no ip address
>>
>> encapsulation frame-relay IETF
>>
>> no fair-queue
>>
>> frame-relay lmi-type ansi
>>
>> !
>>
>> interface Serial0/1/0.1 point-to-point
>>
>> ip address 162.4.102.2 255.255.255.0
>>
>> frame-relay interface-dlci 102
>>
>> !
>>
>> router ospf 1
>>
>> log-adjacency-changes
>>
>> network 10.4.202.0 0.0.0.255 area 0
>>
>> network 162.4.102.0 0.0.0.255 area 0
>>
>> network 172.4.102.0 0.0.0.255 area 0
>>
>> !
>>
>> ip classless
>>
>> !
>>
>> !
>>
>> ip http server
>>
>> ip http access-class 23
>>
>> ip http authentication local
>>
>> no ip http secure-server
>>
>> ip http timeout-policy idle 60 life 86400 requests 10000
>>
>> ip http path flash:
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> control-plane
>>
>> !
>>
>> !
>>
>> !
>>
>> voice-port 0/0/0:0
>>
>> !
>>
>> !
>>
>> !
>>
>> sccp local FastEthernet0/0.240
>>
>> sccp ccm 10.4.202.1 identifier 1
>>
>> sccp
>>
>> !
>>
>> sccp ccm group 1
>>
>> associate ccm 1 priority 1
>>
>> associate profile 1 register mtp001c58bb3448
>>
>> !
>>
>> dspfarm profile 1 transcode
>>
>> codec g711ulaw
>>
>> codec g711alaw
>>
>> codec g729ar8
>>
>> codec g729abr8
>>
>> codec gsmfr
>>
>> codec g729r8
>>
>> maximum sessions 1
>>
>> associate application SCCP
>>
>> !
>>
>> dial-peer cor custom
>>
>> name pt-911
>>
>> name pt-loc
>>
>> name pt-ld
>>
>> name pt-int
>>
>> !
>>
>> !
>>
>> dial-peer cor list css-911
>>
>> member pt-911
>>
>> !
>>
>> dial-peer cor list css-loc
>>
>> member pt-loc
>>
>> !
>>
>> dial-peer cor list css-ld
>>
>> member pt-ld
>>
>> !
>>
>> dial-peer cor list css-int
>>
>> member pt-int
>>
>> !
>>
>> dial-peer cor list css-911-loc
>>
>> member pt-911
>>
>> member pt-loc
>>
>> !
>>
>> dial-peer cor list css-all
>>
>> member pt-911
>>
>> member pt-loc
>>
>> member pt-ld
>>
>> member pt-int
>>
>> !
>>
>> !
>>
>> dial-peer voice 911 pots
>>
>> corlist outgoing css-911
>>
>> !
>>
>> dial-peer voice 1 pots
>>
>> corlist outgoing css-loc
>>
>> !
>>
>> dial-peer voice 2 pots
>>
>> corlist outgoing css-ld
>>
>> !
>>
>> dial-peer voice 3 pots
>>
>> corlist outgoing css-int
>>
>> !
>>
>> dial-peer voice 10 voip
>>
>> session protocol sipv2
>>
>> incoming called-number 3...
>>
>> dtmf-relay rtp-nte
>>
>> !
>>
>> sip-ua
>>
>> timers register 1000
>>
>> registrar dns:sip1.ipexpert.com expires 3600
>>
>> !
>>
>> !
>>
>> !
>>
>> !
>>
>> gatekeeper
>>
>> shutdown
>>
>> !
>>
>> !
>>
>> telephony-service
>>
>> max-ephones 20
>>
>> max-dn 48
>>
>> ip source-address 10.4.202.1 port 2000
>>
>> auto assign 1 to 4
>>
>> timeouts interdigit 7
>>
>> system message BR2-JPSINGH
>>
>> sdspfarm units 1
>>
>> sdspfarm transcode sessions 6
>>
>> sdspfarm tag 1 mtp001c58bb3448
>>
>> network-locale GB
>>
>> create cnf-files version-stamp 7960 Oct 13 2007 11:57:46
>>
>> dialplan-pattern 1 3313243... extension-length 4
>>
>> max-conferences 8 gain -6
>>
>> web admin system name cisco password cisco
>>
>> dn-webedit
>>
>> time-webedit
>>
>> transfer-system full-consult
>>
>> after-hours block pattern 1 9011
>>
>> after-hours day Sun 23:59 09:00
>>
>> after-hours day Mon 17:00 09:00
>>
>> after-hours day Tue 17:00 09:00
>>
>> after-hours day Wed 17:00 09:00
>>
>> after-hours day Thu 17:00 09:00
>>
>> after-hours day Fri 17:00 09:00
>>
>> after-hours day Sat 09:00 23:59
>>
>> !
>>
>> !
>>
>> ephone-dn 1 dual-line
>>
>> number 3001
>>
>> corlist incoming css-911-loc
>>
>> !
>>
>> !
>>
>> ephone-dn 2 dual-line
>>
>> number 3002
>>
>> corlist incoming css-all
>>
>> !
>>
>> !
>>
>> ephone-dn 3 dual-line
>>
>> number 3003
>>
>> corlist incoming css-all
>>
>> !
>>
>> !
>>
>> ephone-dn 4 dual-line
>>
>> number 3004
>>
>> !
>>
>> !
>>
>> ephone-dn 5 dual-line
>>
>> number 3010
>>
>> huntstop channel
>>
>> no huntstop
>>
>> !
>>
>> !
>>
>> ephone-dn 6 dual-line
>>
>> number 3010
>>
>> preference 1
>>
>> huntstop channel
>>
>> no huntstop
>>
>> !
>>
>> !
>>
>> ephone-dn 11
>>
>> number 1007
>>
>> paging ip 239.0.1.20 port 2000
>>
>> !
>>
>> !
>>
>> ephone-dn 12
>>
>> number 1008
>>
>> paging ip 239.0.1.20 port 2000
>>
>> !
>>
>> !
>>
>> ephone-dn 13
>>
>> number 1009
>>
>> paging ip 239.0.1.20 port 2000
>>
>> paging group 11,12
>>
>> !
>>
>> !
>>
>> ephone 1
>>
>> mac-address 001B.D460.6FEF
>>
>> paging-dn 11
>>
>> type 7960
>>
>> button 1:1 2c5,6
>>
>> !
>>
>> !
>>
>> !
>>
>> ephone 2
>>
>> mac-address 001B.D460.6FCF
>>
>> paging-dn 12
>>
>> type 7960
>>
>> button 1:2
>>
>> !
>>
>> !
>>
>> !
>>
>> ephone 3
>>
>> mac-address 000D.654B.92D7
>>
>> type 7960
>>
>> button 1:3 2c5,6
>>
>> !
>>
>> !
>>
>> !
>>
>> ephone 4
>>
>> mac-address 0030.94C2.6C78
>>
>> type 7960
>>
>> button 1:4
>>
>> !
>>
>> !
>>
>> !
>>
>> line con 0
>>
>> login local
>>
>> line aux 0
>>
>> line 194
>>
>> no activation-character
>>
>> no exec
>>
>> transport preferred none
>>
>> transport input all
>>
>> transport output all
>>
>> line vty 0 4
>>
>> access-class 23 in
>>
>> exec-timeout 0 0
>>
>> privilege level 15
>>
>> login local
>>
>> transport input telnet
>>
>> line vty 5 15
>>
>> access-class 23 in
>>
>> privilege level 15
>>
>> login local
>>
>> transport input telnet
>>
>> !
>>
>> warm-reboot
>>
>> scheduler allocate 20000 1000
>>
>> ntp clock-period 17179810
>>
>> ntp server 10.4.200.3
>>
>> !
>>
>> end
>>
>>
>>
>>
**********************************************************************
>> Any opinions expressed in the email are those of the individual and
> not
>> necessarily the company. This email and any files transmitted with it
> are
>> confidential and solely for the use of the intended recipient. If
>> you
> are not
>> the intended recipient or the person responsible for delivering it to
> the
>> intended recipient, be advised that you have received this email in
> error and
>> that any dissemination, distribution, copying or use is strictly
> prohibited.
>>
>> If you have received this email in error, or if you are concerned
>> with
> the
>> content of this email please e-mail to: e-security.support@vanco.info
>>
>> The contents of an attachment to this e-mail may contain software
> viruses
>> which could damage your own computer system. While the sender has
> taken every
>> reasonable precaution to minimise this risk, we cannot accept
> liability for
>> any damage which you sustain as a result of software viruses. You
> should carry
>> out your own virus checks before opening any attachments to this
> e-mail.
>>
>> Vanco UK Ltd Registered in England No: 2296733 Registered Office:
>> Units 1 &2, Great West Plaza, Riverbank Way,Brentford, TW8 9RE, UK
>>
>> Please consider the environment before printing this e-mail
>>
**********************************************************************
>>
>>
>
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:28 ART