From: Bob Sinclair (bob@bobsinclair.net)
Date: Sun Nov 04 2007 - 13:03:28 ART
CCIE wrote:
> R1===SW1==trunk===SW2====R2
>
>
>
> Both R1 and R2 in the same VLAN, how I could tunnel CDP so I may see R2 from
> R1?
>
On the switch ports facing R1 and R2 enter: l2protocol-tunnel cdp
This will cause the switch to flood the cdp traffic throughout the vlan
using a new multicast address. This feature is often associated with
QinQ tunneling, but is independent of it.
--Bob Sinclair CCIE 10427 CCSI 30427 www.netmasterclass.net
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:28 ART