From: shiran guez (shiranp3@gmail.com)
Date: Sat Nov 03 2007 - 05:12:54 ART
**
LACP uses the following parameters:
LACP system priorityYou must configure an LACP system priority on each
switch running LACP. The system priority can be configured automatically or
through the CLI (see the "Configuring the LACP System Priority and System
ID"
section<http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.1E/n
ative/configuration/guide/channel.html#wp1036815>).
LACP uses the system priority with the switch MAC address to form the system
ID and also during negotiation with other systems.
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.1E/native/co
nfiguration/guide/channel.html
On 11/3/07, CCIE <ccie@axizo.com> wrote:
>
> What is the LACP system priority value used for?
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Shiran Guez MCSE CCNP NCE1 http://cciep3.blogspot.com http://www.linkedin.com/in/cciep3
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:27 ART