From: shiran guez (shiranp3@gmail.com)
Date: Sat Nov 03 2007 - 04:29:40 ART
I will test it my self later on today. as I am not to sure about the nested
under the subint
usually when I work with FR subint i use the legacy map-class FR and if i
need to put some newer MQC i nest the MQC inside the map-class.
On 11/3/07, Champika G <693455@gmail.com> wrote:
>
> You have to use a nested policy if applying to a Subif. My initial Qn
> was the SG applies it under physical interface, and not under the
> subif.
> It could be that there is only one p2p subif between the two networks,
> and therefore the config applied to the phsyical interface is
> inherited by the subif.
>
> Infact when i tested it under the physical interface. I was getting
> matches for that policy map. Just want to clarify whats the best way
> to do this?
>
> Champika
>
> On 11/3/07, shiran guez <shiranp3@gmail.com> wrote:
> > yes, it need to be set under the subinterface.
> >
> > On 11/3/07, Champika G <693455@gmail.com> wrote:
> > > Hi Shiran
> > > Shouldnt the Queining policy be applied on to the subinterface and not
> > > the physical interface, since IP config is on the subif?
> > >
> > > Champ
> > >
> > > On 11/2/07, shiran guez <shiranp3@gmail.com> wrote:
> > > > why would you need here nested policy?
> > > > also you are not asked to shape traffic just to gurntee 256Kbps for
> that
> > > > specific host and protocol.
> > > >
> > > > policy-map BW
> > > > class SMTP
> > > > bandwidth 256
> > > >
> > > > On 11/2/07, Champika G <693455@gmail.com> wrote:
> > > > >
> > > > > Hi all
> > > > >
> > > > > This task says that SMTP traffic from and to the server over the
> FR
> > > > > cloud should be guaranteed 256 KBPS. The port speed is at 512KBPS
> in
> > > > > the FR links.
> > > > > R3 & R5 are connected to the FR cloud via two subinterfaces.
> > > > >
> > > > > I assume that the right eay to do it is by configuring a
> heirarchical
> > > > > policy map and appyling it to the sub interface. But the SG uses a
> > > > > noremal policymap with bandwidth command and applies it to the
> > > > > phsyical interface. Isnt this wrong ??
> > > > >
> > > > > My config was;
> > > > >
> > > > >
> > > > > class-map match-all SMTP
> > > > > match access-group name SMTP
> > > > > !
> > > > > !
> > > > > policy-map BW
> > > > > class SMTP
> > > > > bandwidth 256
> > > > > policy-map PARENT
> > > > > class class-default
> > > > > shape average 256000
> > > > > service-policy BW
> > > > >
> > > > > interface Serial0/0.1 point-to-point
> > > > > bandwidth 512
> > > > > backup delay 1 1
> > > > > backup interface Serial0/1
> > > > > ip address 132.1.35.5 255.255.255.0
> > > > > frame-relay interface-dlci 513
> > > > > service-policy output PARENT
> > > > > !
> > > > >
> > > > > ip access-list extended SMTP
> > > > > permit tcp any host 132.1.3.100 eq smtp
> > > > >
> > > > > Appreciate some help please? THanks
> > > > >
> > > > > Champ
> > > > >
> > > > >
> > > >
> > _______________________________________________________________________
> > > > > Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Shiran Guez
> > > > MCSE CCNP NCE1
> > > > http://cciep3.blogspot.com
> > > > http://www.linkedin.com/in/cciep3
> > >
> >
> >
> >
> > --
> >
> > Shiran Guez
> > MCSE CCNP NCE1
> > http://cciep3.blogspot.com
> > http://www.linkedin.com/in/cciep3
>
-- Shiran Guez MCSE CCNP NCE1 http://cciep3.blogspot.com http://www.linkedin.com/in/cciep3
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:27 ART