From: M_A_Jones@Dell.com
Date: Fri Nov 02 2007 - 18:06:08 ART
Correct,
Removing vlan 1 would remove Vlan 1 traffic per say, however management
traffic would continue to tranverse vlan 1...
Michael Jones
Network Engineer
Global Network Operations
Dell Inc.
512.723.3268
-----Original Message-----
From: Scott Vermillion [mailto:scott_ccie_list@it-ag.com]
Sent: Friday, November 02, 2007 4:03 PM
To: Jones, Michael A - Authorized Dell Representative;
alex.steer@eison.co.uk; ccielab@groupstudy.com
Subject: RE: switch trunk allow vlan except 1 (valid for not allowing
untagged packets across a trunk?)
Hey Michael,
Actually, you bring to mind a good point: if the task called for some
trunk traffic to be untagged somewhere but all traffic to be
tagged/encapsulated elsewhere on that same box, you'd need to do dot1q
for the untagged portion and I guess ISL for the other. All I know of
is to globally enable or disable tagging of the native VLAN. There
isn't a way to do it at interface level is there?
Also, I just remembered from a recent CoD session that not allowing
VLAN1 on a trunk is simply "VLAN1 minimization"; it prevents user
traffic from traversing the trunk in VLAN1 but not control traffic. So
you would still have some untagged traffic with that approach.
Regards,
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
M_A_Jones@Dell.com
Sent: Friday, November 02, 2007 2:24 PM
To: alex.steer@eison.co.uk; ccielab@groupstudy.com
Subject: RE: switch trunk allow vlan except 1 (valid for not allowing
untagged packets across a trunk?)
INMHO
I would think in essence this is can be completed both ways, I would
think on the test you'd have to make sure the words used wouldn't
include default.If the term default was used Im sure you know ISL would
be your T protocol of choice.
Esentially all vlans are tagged either way using do1q native command.
Are you sure the question didn't state " All traffic transvering the
trunk should be tagged" ??
Michael Jones
Network Engineer
Global Network Operations
Dell Inc.
512.723.3268
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Alex Steer
Sent: Friday, November 02, 2007 3:05 PM
To: CCIE Group Study CCIE Group Study
Subject: switch trunk allow vlan except 1 (valid for not allowing
untagged packets across a trunk?)
Hi,
Can anyone give their thoughts on this please?
Question:-
"All traffic sent over these trunk links should be tagged with a VLAN"
Int fa0/7
Swi trunk encap dot
Swi mode trunk
Swi trunk native vlan 1 (for completeness)
Swi trunk allow vlan except 1
The solution to this question required the configuration of the trunk to
be ISL. Being thick I forgot ISL tags all packets. Do the above
solution solve the question?
I have a funny feeling I have asked this before J
Cheers
Alex
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:27 ART