From: Scott Vermillion (scott_ccie_list@it-ag.com)
Date: Thu Nov 01 2007 - 20:54:45 ART
I've seen links posted here several times but save yourself a few seconds
and do it from the command line:
'sh ip port-map' (fairly extensive list) or 'sh ip port-map telnet' or 'sh
ip port-map | inc blah'
I don't think that this works for any IP protocols. In other words, if you
try to do a 'sh ip port-map esp' it isn't going to work, as this isn't a
port number but rather a protocol number. If you needed to know that, I
guess you'd still have to go to the DocCD. But if it was a port number I
was after, I'd try this approach first.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
George Goglidze
Sent: Thursday, November 01, 2007 4:48 PM
To: Cisco certification
Subject: doccd question
Hi all,
Can anyone tell me please, if you know where on DOCCD can I find information
about application ports.
for example, ports like telnet, ftp and many other that are not well known.
Many thanks,
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:27 ART