From: ccie1101 (ccie1101@gmail.com)
Date: Fri Oct 26 2007 - 14:20:36 ART
GS,
The scenario is as follows. I want to have a link that gurantees latency
for Voice Traffic.
Therefore, I turn on 'frame-relay traffic-shaping' so that I can use the
frame-relay fragment command.
[1] If I want to gurantee maximum usage on the link, I make the CIR =
minCIR, would I then need to
turn off 'frame-relay adaptive-shaping becn' so that I can set the
cir=mincir ?? I
Pls advice ...or just don't do any 'frame-relay adaptive-shaping' on the
interface ?
[2] For Voice over the serial link, is the Tc value 10ms ? I always use the
Tc as 125ms.
Pls advice,
Thanks,
ccie1101.
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:18 ART