From: Joseph Saad (joseph.samir.saad@gmail.com)
Date: Tue Oct 23 2007 - 16:08:29 ART
Interestingly enough, the switches support pinging of broadcast address in
rtr, but not the routers.
Rack1SW1(config)#do sh ver | i IOS
Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version
12.2(25)SEE3,
RELEASE SOFTWARE (fc2)
Rack1SW1(config)#rtr 2
Rack1SW1(config-rtr)#type udpEcho dest-ipaddr ?
Hostname or A.B.C.D IP address or hostname
Rack1SW1(config-rtr)#type udpEcho dest-ipaddr 255.255.255.255 ?
dest-port Destination Port
Rack1SW1(config-rtr)#type udpEcho dest-ipaddr 255.255.255.255
On 10/23/07, Joseph Saad <joseph.samir.saad@gmail.com> wrote:
>
> I am trying to test the ip helper-map feature by generating a UDP echo via
> the "ip sla monitor".
>
> It however doesn't allow me to specify broadcast addresses
>
> TermServ(config-sla-monitor)#type udpEcho dest-ipaddr ?
> Hostname or A.B.C.D IP address or hostname, broadcast disallowed
>
> TermServ#do sh ver | i IOS
> Cisco IOS Software, 3600 Software (C3640-JK9O3S-M), Version 12.4(16),
> RELEASE SOFTWARE (fc1)
>
> Any idea how I can test this feature?
>
> Thanks,
> Joseph.
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:18 ART