From: Scott Morris (smorris@ipexpert.com)
Date: Mon Oct 22 2007 - 12:02:24 ART
It's just math. 5+4+3+2+1 I didn't spend any time thinking more about what
things would/wouldn't change. That's the part about studying. :)
-----Original Message-----
From: Joseph Brunner [mailto:joe@affirmedsystems.com]
Sent: Monday, October 22, 2007 10:45 AM
To: 'Scott Morris'; 'Ananth Vk'; ccielab@groupstudy.com
Subject: RE: Query : Network Types
Scott is that 15 number including when we use 2 network types that do/don't
require a dr and change the timers?
-Joe
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Scott Morris
Sent: Monday, October 22, 2007 10:20 AM
To: 'Ananth Vk'; ccielab@groupstudy.com
Subject: RE: Query : Network Types
As long as you have labbed those up and SEEN how things work, you'll have no
worry about the order or combination or anything.
There are 5 network types:
1. broadcast
2. non-broadcast
3. point-to-point
4. point-to-multipoint
5. point-to-multipoint non-broadcast
If you are aware of the details of each, you'll be fine. Mathematically,
there are 15 different combinations you can come up with.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE-M
#153, JNCIS-ER, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
VP - Technical Training - IPexpert, Inc.
IPexpert Sr. Technical Instructor
A Cisco Learning Partner - We Accept Learning Credits!
smorris@ipexpert.com
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ananth Vk
Sent: Monday, October 22, 2007 5:31 AM
To: ccielab@groupstudy.com
Subject: Query : Network Types
Hi
I just wanted to confirm that these are the following network types
regardless of layer 3 protocol
1. point to point - serial point to point links
2. broadcast - lan
3. NBMA (FR/ATM/etc)
A. Pure Point-to-Point Configuration (each VC on a separate subinterface)
B. Pure Multipoint Configuration (no subinterfaces)
C. Hybrid Configuration (point-to-point and multipoint subinterfaces)
I got this from a cisco link, is this the right order/fashion that i should
remember / is there a different perspective ?
Pls advice !
Thanks
Ananth
=====-----=====-----=====
Notice: The information contained in this e-mail message and/or attachments
to it may contain confidential or privileged information. If you are not the
intended recipient, any dissemination, use, review, distribution, printing
or copying of the information contained in this e-mail message and/or
attachments to it are strictly prohibited. If you have received this
communication in error, please notify us by reply e-mail or telephone and
immediately and permanently delete the message and any attachments. Thank
you
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:17 ART