From: Gregory Gombas (ggombas@gmail.com)
Date: Thu Oct 18 2007 - 23:51:09 ART
Perfect - that did the trick!
Thanks!
On 10/18/07, Joel Amao <femmy79@hotmail.com> wrote:
>
> Add the delay option .
>
> R2(config-track)#delay ?
> down Delay down change notification
> up Delay up change notification
>
>
>
>
>
> Joel Amao
> CCIE#18128
>
>
>
>
>
>
>
> > Date: Thu, 18 Oct 2007 22:01:06 -0400
> > From: ggombas@gmail.com
> > To: ccielab@groupstudy.com
> > Subject: Can you adjust the sensitivity of SLA monitor?
>
> >
> > I'm using SLA to track the next hop for a static route. The problem is
> > that no matter how large I set the frequency or timeout values, it
> > only takes one lost packet for the tracked object to go down.
> >
> > Is there away to adjust the sensitivity of this i.e. must lose five
> > packets before reporting the object as down?
> >
> > Here is my config:
> >
> > ip sla monitor 1
> > type echo protocol ipIcmpEcho 10.1.1.1
> > timeout 3000
> > frequency 120
> >
> > ip sla monitor schedule 1 life forever start-time now
> >
> > track 1 rtr 1 reachability
> > !
> > ip route 0.0.0.0 0.0.0.0 10.1.1.1 100 track 1
> > ip route 0.0.0.0 0.0.0.0 10.1.1.2 200
> > !
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> ________________________________
> Peek-a-boo FREE Tricks & Treats for You! Get 'em!
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:16 ART