From: fadel lubbos (fadellubbos@hotmail.com)
Date: Thu Oct 18 2007 - 06:05:29 ART
Hi
It worked fine on SW 3560.
I have 3550 which is running IOS 12.1 (19) EA
i could create it, but the Macro global apply .... does not work
when write macro ?
i only get the Name command
any clue
.
> From: joe@affirmedsystems.com> To: slevin.kremera@gmail.com;
ccielab@groupstudy.com> Subject: RE: ping script> Date: Thu, 18 Oct 2007
02:31:43 -0400> > Here we use the macro apply, don't waste time with rshelling
the tcl> commands into switches for ping connectivity. If a tasks tell you
should be> able to ping then ping!, if not assume its cosmetically complete if
the> routes appear as they should... that is hard enough, IMHO...> >
rack1sw1(config)#macro name slevin> Enter macro commands one per line. End
with the character '@'.> do ping 150.1.1.1> do ping 150.1.2.2> do ping
150.1.3.3> do ping 150.1.4.4> @> rack1sw1(config)#macro global apply slevin> >
Type escape sequence to abort.> Sending 5, 100-byte ICMP Echos to 150.1.1.1,
timeout is 2 seconds:> .....> Success rate is 0 percent (0/5)> Type escape
sequence to abort.> Sending 5, 100-byte ICMP Echos to 150.1.2.2, timeout is 2
seconds:> .....> Success rate is 0 percent (0/5)> Type escape sequence to
abort.> Sending 5, 100-byte ICMP Echos to 150.1.3.3, timeout is 2 seconds:>
.....> Success rate is 0 percent (0/5)> Type escape sequence to abort.>
Sending 5, 100-byte ICMP Echos to 150.1.4.4, timeout is 2 seconds:> .....>
Success rate is 0 percent (0/5)> > -----Original Message-----> From:
nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of> slevin
kremera> Sent: Thursday, October 18, 2007 2:02 AM> To: CCIE Group Study CCIE
Group Study> Subject: ping script> > Hi> > Any ping script available for
switches??> > > Also is it necessary that one shud be able to ping routes
coming from all> the Backbone routers> >
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:15 ART