RE: [Bulk] dhcp manual bindings

From: Lamine BOUAFIA (b_lamine@yahoo.fr)
Date: Wed Oct 17 2007 - 13:01:32 ART

• Next message: Scott M Vermillion: "RE: DVMRP Testing?"
• Previous message: Joseph Brunner: "RE: conditional default advertising in BGP with multiple routes"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

You should enable "debug ip dhcp packet server" and/or " debug ip dhcp
packet events" and let "ip address dhcp" on the interface, you will see on
the screen the Client-ID that you should use in "client-identifier
CLIENT-ID".
  
Regards,
Lamine
-----Message d'origine-----
De : nobody@groupstudy.com [mailto:nobody@groupstudy.com] De la part de
Navid Daghighi
Envoyi : mercredi 17 octobre 2007 12:14
@ : Cisco certification
Objet : [Bulk] dhcp manual bindings

Hi,

How can I check what should be the parameter that I should type after
the command :

    hardware-address (I tried the MAC address alone, it did not work)
       or
    client-identifier (I tried the MAC address prefixed by 01 + moving
the 'dots' by 2 digits to the right, it did not work)

Thanks,
Navid

• Next message: Scott M Vermillion: "RE: DVMRP Testing?"
• Previous message: Joseph Brunner: "RE: conditional default advertising in BGP with multiple routes"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:15 ART