From: Gregory Gombas (ggombas@gmail.com)
Date: Wed Oct 17 2007 - 11:07:53 ART
Being that PPP is a point-to point techology, wouldn't you need to
create two separate virtual templates, each in its own subnet?
On 10/16/07, ISolveSystems <support@isolvesystems.com> wrote:
> R3 as a hub connects to R4 and R5.
>
> PPP over FR is configured on all routers.
>
> R3 has:
> fram interface-dlci 305 ppp virtual-te 1
> fram interface-dlci 304 ppp virtual-te 1
> int virtual-tem
> ip add 164.2.0.3 255.255.255.0
>
> All routers are in OSPF area 0 and the ospf network type is point-to-multi.
>
> Route from R3 to R5 fram int show goes out through Virtual-access 1.
> Route from R3 to R4 fram int show goes out through Virtual-access 2.
>
> For some reason, the route learned via OSPF from R4 would show next hop IP
> of R4 FR interface, but the interface show virtual-acces 1. If I remove the
> virtual-tem and reapply the problem would show up for R5.
>
> Any idea?
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:15 ART