From: Matthew Long (mlong@comms-care.com)
Date: Wed Oct 17 2007 - 05:22:43 ART
I moved to fedora 7 yesterday as I was fed up with issue with dynamips
under windows
If you are unsure of how to configure it take a look at
http://www.blindhog.net/cisco-dynamips-and-dynagen-install-on-linux/
(don't download just click on the image)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
John Jones
Sent: 17 October 2007 06:01
To: Peter Kim
Cc: dsbabbar@gmail.com; ccielab@groupstudy.com
Subject: Re: Dyangen for R&S
Just to echo everyone else, I would run Dynamips on Linux. I get 60% CPU
utilization running 10 routers on Fedora 6. Plenty CPU power left over
to
run lots of other apps.
Just an idea, but maybe you could send your laptop to someone here on GS
and
they could install Linux and get Dynamips all set up for you. Then al
you
would have to do is run a script and away you go.
Just a thought...
John
On 10/16/07, Peter Kim <pskim219@gmail.com> wrote:
>
> Hi GS,
>
> I have been using dynamips for over 10 months.
> I started with IEWB Tech lab, using Duo Core using window xp.
> No issue was found with that because I am not running too much router.
>
> However few months back, I started using dynamips for IEWB full lab.
I
> am
> having too much problem.... some sort of access violation error.
>
> So I decided to buy better computer. Dell Quad 6600 with 4G of RAM.
>
> Same issue with access violation.
>
> So I just changed yesterday with ubuntu 7.04 desktop 64bit.
> I changed few things and installed it.
>
> I also installed ssh-server so that I can ssh to my box from any
where.
>
> Amazing, I am doing IEWB dynamips Lab from my work...
> No issue.
>
> only take about 18 % cpu.
>
> Strongly recommend to use Linux for IEWB Dynamips lab.
>
> On 10/15/07, dsbabbar@gmail.com <dsbabbar@gmail.com> wrote:
> >
> > Hi GS,
> >
> > I have recently started using dynagen for preparation of R&S lab. I
am
> > facing lot of issues running it on my P4-2.8Ghz Server with 2 GB
RAM,
> > WinXP-SP2. I am using the sample Internetwork Expert Topologies for
> Dynagen
> > v4.01 with the exact IOS mentioned in the .net file. Tried using a
lot
> of
> > idlepc values but my CPU usage doesn't go down. Sometimes 1 or 2
routers
> get
> > stuck/very slow and i have no other option than to Stop n Start
those
> > routers.
> >
> > Can anyone suggest an IOS and its tried n trusted idlepc value that
> works
> > even when all the routers in the topology are running.
> >
> >
> > Thanks & Regards
> >
> > Deepinder Singh Babbar
> >
> >
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:15 ART