From: Con Spathas (con@spathas.net)
Date: Mon Oct 15 2007 - 22:01:22 ART
It is my understanding that once you've bundled a number of physical ports
into a channel-group - all subsequent commands should really be
added/removed under the logical port-channel interface. The physical ports
will inherit these commands automatically.
I suppose one exception to this rule is when building L3 etherchannels - the
'no switchport' command is added to the physical ports - and then I
personally re-do it again under the logical port-channel interface.
Lastly - my personal habit is to make sure all the physical ports joining
the channel-group are shutdown first - do all my configuration and then
finally enable the physical ports when finished.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
fadel lubbos
Sent: Monday, 15 October 2007 22:59
To: CCIE Group Study CCIE Group Study
Subject: Trunk mode under port-channel
Hi GS
If I have three switch ports and want to bundle them under group 1 for
example, is it required to configure the port-channel to be in trunk mode
also, or only the group members?
regards,
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:15 ART