From: Toh Soon, Lim (tohsoon28@gmail.com)
Date: Mon Oct 15 2007 - 13:02:25 ART
Hi Group,
A task states:
~~~ Configure the Frame Relay networks to use Compatible Addressing with the
IPv4 networks ~~~
I suppose it means IPv4-Compatible IPv6 Address.
So, if the IP address is 172.17.24.2/30, the IPv6 address would be
::AC11:1802
I got the following error message when configuring it on the router using
126-bit mask:
R4(config)#int s 0/0
R4(config-if)#ipv add ::AC11:1802/126
% ::172.17.24.2/126 can not be configured on Serial0/0, invalid
However it accepts "ipv6 address ::1:AC11:1802/126". Does this correctly
answer the task?
Please shed some light on the issue.
Thank you.
B.Rgds,
Lim TS
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:15 ART