From: Mark Snow (msnow@ipexpert.com)
Date: Sun Oct 14 2007 - 21:17:43 ART
Hi J P,
First off - did resetting your HL work as Wilfred had suggested
yesterday?
Secondly, are you using ProctorLabs equipment or are you using your
own and mirroring the configs that we have on ours?
Also - it looks like you are trying to use Pod 4's information - is
that correct?
So assuming that this is all true - then I would ask you to post your
PSTN router config.
Also - you copied and pasted your config from your CallManager - but
from your copy paste - one cannot discern how you have things setup.
For instance - here is part of your copy/paste:
<snip>
> PRI Protocol Type* -- Not Selected ---PRI EUROPRI
> AUSTRALIANPRI QSIG E1
>
> Protocol Side* --- Not Selected ---NetworkUser
<\snip>
Your SDA cannot be configured to all these flavors of PRI and to
Network and User at the same time - so you will need to be a little
more clear on that part.
Finally - to answer the question you asked in your latest email
<snip>
"one other thing the E1 link is currenlty not up.. but i dont think
that
needs to be up for the Gateway to be registered to CCM ??"
</snip>
Yes - you do have to have ISDN L3 Multiple Frames Established for it
to show registered in CCM.
HTH some and look forward to your responses,
Mark Snow
CCIE #14073 (Voice, Security)
CCSI #31583
Senior Technical Instructor - IPexpert, Inc.
A Cisco Learning Partner - We Accept Learning Credits!
Telephone: +1.810.326.1444
Fax: +1.309.413.4097
Mailto: msnow@ipexpert.com
IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On
Demand and Audio Certification Training Tools for the Cisco CCIE R&S
Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab
and CCIE Storage Lab Certifications.
On Oct 14, 2007, at 3:38 PM, Irfan Siddiqui wrote:
> Dear All,
>
> I am stuck at gateway . 6608 is not registered with Call manager. I
> am doing
> exactly as per solution guide of IPexpert. This is the Lab Section 4.
>
> Please help ??
>
> here is the config and sh port config of 6509.
>
>
>
> Here is the config of call manager gateway
>
> Product : Cisco Catalyst 6000 E1 VoIP Gateway
>
> Gateway : S0/DS1-0@SDA0019AAF51C8A
>
> Device Protocol: Digital Access PRI
>
> Registration: Unknown
>
> IP Address:
>
>
>
>
>
> Device Information
>
>
>
> MAC Address*
>
> Description
>
> Device Pool* --- Not Selected ---BR1BR2HQ
>
> Call Classification* --- Not Selected ---OnNetOffNetUse System
> Default
>
> Network Locale < None >United States
>
>
>
> Media Resource Group List < None >
>
>
>
>
>
> Location < None >BR1HQ
>
> AAR Group < None >
>
> Load Information
>
> Multilevel Precendence and Preemption (MLPP) Information
>
> MLPP Domain (e.g., "0000FF")
>
> MLPP Indication Not available on this device
>
> MLPP Preemption Not available on this device
>
>
>
> Interface Information
>
> PRI Protocol Type* -- Not Selected ---PRI EUROPRI
> AUSTRALIANPRI QSIG E1
>
> Protocol Side* --- Not Selected ---NetworkUser
>
> Channel Selection Order* --- Not Selected ---Bottom UpTop Down
>
> Channel IE Type* --- Not Selected ---Timeslot NumberSlotmapUse
> Number when
> 1BContinuous Number
>
> PCM Type* --- Not Selected ---A-law5-law
>
> Delay for first restart (1/8 sec ticks)
>
> Delay between restarts (1/8 sec ticks)
>
> Inhibit restarts at PRI initialization
>
>
>
> Enable status poll
>
>
>
> CCIEVOICE6500> (enable)
>
> CCIEVOICE6500> (enable) sh runn
>
> This command shows non-default configurations only.
>
> Use 'show config all' to show both default and non-default
> configurations.
>
> .................
>
> ..........................
>
> .............................
>
> .............................
>
> ......................
>
>
>
>
>
>
>
> ..
>
> begin
>
> !
>
> # ***** NON-DEFAULT CONFIGURATION *****
>
> !
>
> !
>
> #time: Sun Oct 14 2007, 05:24:20 EDT
>
> !
>
> #version 7.6(1)
>
> !
>
> set enablepass $2$CBqb$8Ve8Pb3kGzRkKuBUmNNQa1 !
>
> #errordetection
>
> set errordetection portcounter enable
>
> !
>
> #system
>
> set system name CCIEVOICE6500
>
> !
>
> #!
>
> #vtp
>
> set vtp domain ccievoice
>
> set vtp v2 enable
>
> set vlan 1 name default type ethernet mtu 1500 said 100001 state
> active set
> vlan 200 rspan name RSPAN state active set vlan 1002 name fddi-
> default type
> fddi mtu 1500 said 101002 state active set vlan 1004 name fddinet-
> default type
> fddinet mtu 1500 said 101004 state activ e bridge 0x0 stp ieee set
> vlan 1005
> name trbrf-default type trbrf mtu 4472 said 101005 state active br
> idge 0xf
> stp ibm set vlan 210,220,240 set vlan 1003 name trcrf-default type
> trcrf mtu
> 4472 said 101003 state active pa rent 1005 ring 0xccc mode srb
> aremaxhop 7
> stemaxhop 7 backupcrf off !
>
> #ip
>
> set interface sc0 1 10.4.0.100/255.255.255.0 10.4.0.255 set
> interface sc1 0
> 0.0.0.0/0.0.0.0 0.0.0.0 set interface sc1 down
>
> set ip alias default 0.0.0.0
>
> !
>
> #syslog
>
> set logging level ethc 2 default
>
> set logging level gl2pt 2 default
>
> !
>
> #ntp
>
> set ntp client enable
>
> set ntp server 10.4.200.3
>
> set timezone est -5 0
>
> set summertime enable EDT
>
> !
>
> #set boot command
>
> set boot config-register 0x2
>
> set boot system flash bootflash:cat6000-supk8.7-6-1.bin !
>
> #igmp
>
> set igmp disable
>
> !
>
> #qos
>
> set qos wrr 2q2t 5 255
>
> set qos wrr 1p2q2t 5 255
>
> set qos wred 1p2q2t tx queue 1 40:80 70:100 set qos wred 1p2q2t tx
> queue 2
> 40:80 70:100 !
>
> # default port status is enable
>
> !
>
> !
>
> #module 1 : 2-port 1000BaseX Supervisor
>
> set spantree portfast 1/1-2 disable
>
> !
>
> #module 2 : 48-port 10/100BaseTX Ethernet set trunk 2/1
> nonegotiate dot1q
> 1-1005,1025-4094
>
> set spantree portfast 2/1-48 disable
>
> !
>
> #module 3 : 48-port 10/100BaseTX Ethernet set vlan 240 3/5,3/8 set
> port
> auxiliaryvlan 3/31 240 set port auxiliaryvlan 3/32 240
>
> set port speed 3/1-2,3/5 100
>
> set port duplex 3/1-2,3/5 full
>
> set trunk 3/1 on dot1q 1-1005,1025-4094 set trunk 3/22 on dot1q
> 1-1005,1025-4094 set trunk 3/31 auto negotiate 1-1005,1025-4094 set
> trunk 3/32
> auto negotiate 1-1005,1025-4094
>
> set spantree portfast 3/1,3/22,3/31-32 enable
>
> !
>
> #module 4 : 8-port E1
>
> set port voice interface 4/1 dhcp enable vlan 240 set port voice
> interface
> 4/2 dhcp enable vlan 240 set port voice interface 4/3 dhcp enable
> vlan 240
> set port voice interface 4/4 dhcp enable vlan 220 set port voice
> interface
> 4/5 dhcp enable vlan 220 set port voice interface 4/6 dhcp enable
> vlan 220
>
> set port name 4/1 POD11-PSTN-T1
>
> set port name 4/2 POD11-CONFBRDG
>
> set port name 4/3 POD11-TRNSCDR
>
> !
>
> #module 5 empty
>
> !
>
> #module 6 empty
>
> !
>
> #module 7 empty
>
> !
>
> #module 8 empty
>
> !
>
> #module 9 empty
>
> !
>
> #module 15 : 1-port Multilayer Switch Feature Card !
>
> #module 16 empty
>
> end
>
> CCIEVOICE6500> (enable) sh port 4/1
>
> * = Configured MAC Address
>
> Port Name Status Vlan Duplex Speed Type
>
> ----- -------------------- ---------- ---------- ------ -----
> ------------
>
> 4/1 POD11-PSTN-T1 enabled 240 full - unknown
>
> Port DHCP MAC-Address IP-Address Subnet-Mask
>
> -------- ------- ----------------- --------------- ---------------
>
> 4/1 enable 00-19-aa-f5-1c-8a 10.4.200.122 255.255.255.0
>
> Port Call-Manager(s) DHCP-Server TFTP-Server Gateway
>
> -------- ----------------- --------------- ---------------
> ---------------
>
> 4/1 - 10.4.200.21 10.4.200.21 10.4.200.3
>
> Port DNS-Server(s) Domain
>
> -------- -----------------
> -------------------------------------------------
>
> 4/1 - -
>
> Port CallManagerState DSP-Type
>
> -------- ---------------- --------
>
> 4/1 notregistered C549
>
> Port NoiseRegen NonLinearProcessing
>
> ----- ---------- -------------------
>
> 4/1 - -
>
> Port Trap IfIndex
>
> ----- -------- -------
>
> 4/1 disabled 12
>
> Port Status ErrDisable Reason Port ErrDisableTimeout
> Action on
> Timeout
>
> ---- ---------- ------------------- ----------------------
> -----------------
>
> 4/1 enabled - Enable No
> Change
>
> Idle Detection
>
> --------------
>
> --
>
> CCIEVOICE6500> (enable) 2007 Oct 14 05:24:42 EDT -04:00
>
> CCIEVOICE6500> %SYS-4-MODHPRESET:Host p
>
>
>
> Thanks and regards
>
>
>
> J P Singh
>
>
>
>
>
>
>
>
>
>
>
> **********************************************************************
> Any opinions expressed in the email are those of the individual and
> not
> necessarily the company. This email and any files transmitted with
> it are
> confidential and solely for the use of the intended recipient. If
> you are not
> the intended recipient or the person responsible for delivering it
> to the
> intended recipient, be advised that you have received this email in
> error and
> that any dissemination, distribution, copying or use is strictly
> prohibited.
>
> If you have received this email in error, or if you are concerned
> with the
> content of this email please e-mail to: e-security.support@vanco.info
>
> The contents of an attachment to this e-mail may contain software
> viruses
> which could damage your own computer system. While the sender has
> taken every
> reasonable precaution to minimise this risk, we cannot accept
> liability for
> any damage which you sustain as a result of software viruses. You
> should carry
> out your own virus checks before opening any attachments to this e-
> mail.
>
> Vanco UK Ltd Registered in England No: 2296733 Registered Office:
> John Busch
> House, 277 London Road, Isleworth, Middlesex TW7 5AX
>
> Please consider the environment before printing this e-mail
> **********************************************************************
>
> ______________________________________________________________________
> _
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:14 ART