Re: storm-control on 3550 versus 3560

From: Joseph Saad (joseph.samir.saad@gmail.com)
Date: Sun Oct 14 2007 - 11:44:29 ART


> Thank you Narbik. Verified. The answer is no. Only 3550 has such
> limitation.
>
> SW1#sh ver | i IOS
> Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(25)SEE3,
> RELEASE SOFTWARE (fc2)
>
> sh runn int fa0/1 !(corrected a typo here)
> interface FastEthernet0/1
> switchport access vlan 100
> storm-control multicast level 0.00
> ! To R1
> end
>
> sh runn int fa0/3
> !
> interface FastEthernet0/3
> switchport access vlan 100
> storm-control multicast level 0.00
> !To R3
>
> R3#pi 155.1.100.1 repeat 10000
>
> Type escape sequence to abort.
> Sending 10000, 100-byte ICMP Echos to 155.1.100.1, timeout is 2 seconds:
> .!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
> While if storm-control unicast level 0.00 is applied on the interfaces,
> all ping packets fail.
>
> Thanks,
> Joseph



This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:14 ART