From: Scott Morris (smorris@ipexpert.com)
Date: Sat Oct 13 2007 - 16:11:13 ART
There's also a NULL key (key 0) by default when you enable message digest
authentication.
So if you see any reference to null, figure out whether it's the
authentication type or a key.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE-M
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
VP - Technical Training - IPexpert, Inc.
IPexpert Sr. Technical Instructor
A Cisco Learning Partner - We Accept Learning Credits!
smorris@ipexpert.com
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
shiran guez
Sent: Saturday, October 13, 2007 2:31 PM
To: Julio Carrasco
Cc: ccielab@groupstudy.com
Subject: Re: OSPF null authenication VS no ospf authentication
if you look into the RFC then you will see that the OSPF always use
Authentication and the default type is Null so there is no difference, if
you say that the Authentication is Null or you live it with out pointing it
both are the same.
On 10/13/07, Julio Carrasco <julio.carrasco@ya.com> wrote:
>
> Hello group,
>
> Does you know what is the diference between configuring OSPF null
> authentication on an interface, and no configurin any authentication
> method ?
>
> Thank you,
> Julio.
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Shiran Guez MCSE CCNP NCE1 http://cciep3.blogspot.com http://www.linkedin.com/in/cciep3
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:14 ART