From: Narbik Kocharians (narbikk@gmail.com)
Date: Thu Oct 11 2007 - 16:55:18 ART
That is only to reference HSRP, so the active router will perform the
translation.Because remember that stateful NAT can be configured without
HSRP as well.
On 10/11/07, Gregory Gombas <ggombas@gmail.com> wrote:
>
> Thanks Narbik.
>
> But doesn't the redundancy name command put them in the same group? Or
> is that only for HSRP?
>
> Also do you need to configure the same mapping ID on all NAT statements?
>
> Thanks again,
> Greg
>
> On 10/11/07, Narbik Kocharians <narbikk@gmail.com> wrote:
> > Think of it as a group id, and as long as you are a member of that group
> you
> > will get a copy of the translation table. That's if the rest of the
> > configuration is done correctly. If you need an example of the
> > configuration, let me know and i will send you a lab.
> >
> >
> > On 10/11/07, Gregory Gombas <ggombas@gmail.com> wrote:
> > >
> > > Can someone please clarify what the function of the Mapping ID is when
> > > using stateful NAT?
> > >
> > > According to the DOC cd:
> > >
> > > mapping-id map-number - Specifies whether or not the local Stateful
> > > NAT (SNAT) router will distribute a particular set of locally created
> > > entries to a peer SNAT router.
> > >
> > > I noticed in the config examples the mapping ID matches on both
> routers.
> > > Also I noticed the mapping ID configured on the ip nat inside source
> > command.
> > > Does that mean you configure the same mapping ID on all nat statements
> > > you want to share with your peer?
> > >
> > >
> > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> >
> >
> >
> > --
> > Narbik Kocharians
> > CCIE# 12410 (R&S, SP, Security)
> > CCSI# 30832
> > www.Net-WorkBooks.com
>
-- Narbik Kocharians CCIE# 12410 (R&S, SP, Security) CCSI# 30832 www.Net-WorkBooks.com
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:13 ART