From: Jason Guy (jguy) (jguy@cisco.com)
Date: Thu Oct 11 2007 - 11:30:19 ART
I can't explain it, but I had the same problem. Also, in BGP I had
tried some of the conditional advertisement examples on the doccd and
the prefix-list does not *always* work as documented. It may have been
something I did wrong, but the standard ACL seems to always work. I
assume it is a bug, but it is hard know if I have never seen it work.
Jason
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Arun Kumar K
Sent: Thursday, October 11, 2007 8:12 AM
To: ccielab@groupstudy.com
Subject: Regarding Prefix-list and route-source for OSPF
Hello All,
In OSPF I used distribute-list route-map < > to block routes from a
particular router.
If I specify the route source to match a standard access list it works.
I am matching on the router-id.
If I use a prefix list to match the same I see that it doesn't work.
Ex: access-list 10 permit 10.10.10.10 ---- works
ip prefix-list R1 permit 10.10.10.10/32----- doesn't work
Can anyone let me know if I am missing out something here?
Regards,
Arun
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:13 ART