From: Con Spathas (con@spathas.net)
Date: Mon Oct 08 2007 - 18:45:38 ART
Yes you can.
Under the bgp process using the 'bgp dampening' command or if you only want
to target specific routes only and not apply the dampening parameters to all
routes then you can set the dampening variables in a route-map and then
attach that to the 'bgp dampening' command under the bgp process.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hirp_r
/rte_bgh1.htm#wp1071511
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hirp_c
/ch05/1cfbgph.htm#wp1002395
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joseph Saad
Sent: Monday, 8 October 2007 20:24
To: Cisco certification
Subject: change default penalty value for BGP dampening
As stated in most text books, default penalty value is 1000 per flap for bgp
routes.
Is there a way to change this default value?
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:12 ART